These are my exact steps:
1. place the record on the okki nokki. Take off the dust with cloth which came with AM record cleaner spray. Then wet with L'art du son solution. I mixed 20 ml of L'art du son with 1L of distilled water for my solution.
2. Hold the MFSL brush gently on the record for 10 rotations clockwise and 10 anti clockwise.
3. Hoover up using 3 rotations.
4. Rinse with distilled water (aqua bidets) by holding a tonar wet goat brush (which has only been used with distilled water) for 10 rotations clockwise and 10 anti-clockwise on record.
5. hoover up.
6. Repeat step 4.
7. place the record on the turntable and wait 10 minutes before playing. And shoot 4 times with zerostat.I do this while the record is on the TT. The tt is obviously switched off.
8. clean the stylus with AT stylus cleaning formula and dip into onzow zero dust (2x).
9. switch on preamp and monitors and switch on the tt.
10. prepare for crackling
Where am I going wrong? The records are all brand new. There are tiny scratches on them caused by the tonar anti-static brush that I was using
Reply With Quote