Check these out!!!
http://theartofsound.net/forum/showt...d=1#post179903
Sorry Alex, thats not particularly helpful is it
Senior Member
Location: Oxford
Posts: 872
I'm NotSoPissedOffNowCosMyHiFisUnpacked.
Check these out!!!
http://theartofsound.net/forum/showt...d=1#post179903
Sorry Alex, thats not particularly helpful is it
Ian
http://www.hifisounds.co.uk
Photo bucket - loads of mods!
SL1200- DIY PSU- DIY FET int regs-Denon DL103 by Expert Stylus Company on Isokenetic stabiliser & Sumiko HS-12 shell- Achromat - Isonoe feet, Meridian 200 Phono satge, Junson JA-88D, Audio Aero Capitole CD/ DAC, extreme modified Marantz SA7001, Squeezebox Touch modded to death!, Focal 826WSE- Kimber 8TC, Kimber and CAT5 attenuated DIY Interconnects, Kimber mains
"Leave Nothing as Standard"
Spotify + Facebook Moderator / Chilled-Out Wino and only here for the shilling
Location: Sunny Suffolk, UK
Posts: 18,518
I'm WrappingALilacCurtainAroundMyBobby.
No Ian, very helpful, I'm ordering 3 sets!
Alex
Main System: Digital: HP Laptop/M2Tech Hiface/Logitech Media Server/FLAC; Marantz SA7001 KI Signature SACD Player and other digital stuff into Gatorised Beresford Caiman DAC Vinyl: Garrard 401/SME 3009 SII Improved/Sumiko HS/Nagaoka MP-30
Amplifier: Rega Brio R. Speakers: Spendor SP1. Cables: Various, mainly Mark Grant. Please see "about me" for the rest of my cr@p! Gallery
A.o.S. on Facebook - A.o.S. on Spotify - A.o.S. on Twitter
There is only one way to avoid criticism: do nothing, say nothing and be nothing Aristotle
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,412
I'm AudioAl'sArbiterForPISHANTO.
Hi Simon,Marco, in your view how would they compare and would my Sugden A21a drive them ok?
I've not heard the Proacs, so couldn't compare the two. Your Sugden should be fine for the job, though.
However, as it's Sevenoaks in Brighton selling the Leemas, perhaps you could take your amp along and demo it with them - or is Brighton a bit too far away?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Oxford
Posts: 872
I'm NotSoPissedOffNowCosMyHiFisUnpacked.
Problem solved!!!! Glad to have been of assistance!Originally Posted by Alex_UK
No Ian, very helpful, I'm ordering 3 sets!
Dare I say it......Focal 7 & 8 series come up pretty cheap on eBay fairly regularly. I've rewired my 716's with 4TC and put Mundorf's in the xovers and they sound a million dollars. Much better than you'd think.
The only thing I'd say about them is that you need to listen to them 1st because they can sound a bit forward if you're not careful.
If they work with your system, they are exceptional VFM. Very accurate and tight.
Ian
http://www.hifisounds.co.uk
Photo bucket - loads of mods!
SL1200- DIY PSU- DIY FET int regs-Denon DL103 by Expert Stylus Company on Isokenetic stabiliser & Sumiko HS-12 shell- Achromat - Isonoe feet, Meridian 200 Phono satge, Junson JA-88D, Audio Aero Capitole CD/ DAC, extreme modified Marantz SA7001, Squeezebox Touch modded to death!, Focal 826WSE- Kimber 8TC, Kimber and CAT5 attenuated DIY Interconnects, Kimber mains
Senior Member
Location: Kent
Posts: 540
I'm Twisted.
Not too far. I am hatching a plan to escape (with the A21a) before the wife and little screamer wake up...However, as it's Sevenoaks in Brighton selling the Leemas, perhaps you could take your amp along and demo it with them - or is Brighton a bit too far away?
Simon
MINI DSP SHD; Longdog 300b; Reiver Fenwicks
Twitter @siashmore
Spotify + Facebook Moderator / Chilled-Out Wino and only here for the shilling
Location: Sunny Suffolk, UK
Posts: 18,518
I'm WrappingALilacCurtainAroundMyBobby.
Certainly noticed the Focals, good looking too... definitely worth adding to the mix, thanks.
Alex
Main System: Digital: HP Laptop/M2Tech Hiface/Logitech Media Server/FLAC; Marantz SA7001 KI Signature SACD Player and other digital stuff into Gatorised Beresford Caiman DAC Vinyl: Garrard 401/SME 3009 SII Improved/Sumiko HS/Nagaoka MP-30
Amplifier: Rega Brio R. Speakers: Spendor SP1. Cables: Various, mainly Mark Grant. Please see "about me" for the rest of my cr@p! Gallery
A.o.S. on Facebook - A.o.S. on Spotify - A.o.S. on Twitter
There is only one way to avoid criticism: do nothing, say nothing and be nothing Aristotle
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,412
I'm AudioAl'sArbiterForPISHANTO.
Hehehe - love it, and good luck!Not too far. I am hatching a plan to escape (with the A21a) before the wife and little screamer wake up...
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Drunken Administrator
Location: Staffordshire, England
Posts: 43,301
I'm Martin.
Here ya go, Alex (if your not already sold on the Beng) - if Avatar pushes
these things they will push back
http://cgi.ebay.co.uk/tannoy-lancast...item45f7f01d5b
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,412
I'm AudioAl'sArbiterForPISHANTO.
Lol! Trouble is, they'll be awful, because Lancaster cabs are WAY too small for 15" Tannoy DCs.....
It's worth it for the drivers and crossovers, though! Then get Speedy Steve to make some nice 200-250 litre cabs for Alex which will match with his new wooden floor
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Drunken Administrator
Location: Staffordshire, England
Posts: 43,301
I'm Martin.
I'm tempted myself TBH - and also by these -Lol! Trouble is, they'll be awful, because Lancaster cabs are WAY too small for 15" Tannoy DCs.....
It's worth it for the drivers and crossovers, though! Then get Speedy Steve to make some nice 200-250 litre cabs for Alex which will match with his new wooden floor
Marco.
http://cgi.ebay.co.uk/CELESTION-7000...item3a6245f635
gotta stop looking at ebay
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
Posting Permissions
Reply With Quote