Senior Member
Location: Finland
Posts: 365
I'm Juha.
No no Alexyou want Terminator T3Pro from Vic. I have drilled a hole on the plinth for you already
. I have the T3Pro sitting there and is sounds sublime with Denon. Only reason why I am considering selling the combo is that I really want to have the Salvation TT, and now I finally have the T3Pro to go with it.
Originally Posted by Alex_UK
My Gear
Source components:
Garrard 401 in a solid birch plywood plinth / Trans-Fi Terminator T3Pro / ESCo modified Denon DL-103
Pioneer TX-9800 tuner
Amplification:
Art Audio Diavolo and Conductor, Pair of XTZ Sub Amp 1's, Nick G 'Dual Phono' phono stage
Loudspeakers:
Bastanis Mandala Atlas with 15" sealed woofers
Cables:
Analysis Plus: Big Silver Oval speaker cables and Silver Oval-in interconnects, Mark Grant DSP 2.5 Dual Screened power cables
Record cleaning
Nitty Gritty 1.5Fi MK II
New Member
Location: west midlands
Posts: 5
I'm steve.
hello selfaddict
interested in your plinth.just sent you a pm
thanks
steve
Senior Member
Location: Finland
Posts: 365
I'm Juha.
Hi Steve and welcome to the AOS.
PM answered.
My Gear
Source components:
Garrard 401 in a solid birch plywood plinth / Trans-Fi Terminator T3Pro / ESCo modified Denon DL-103
Pioneer TX-9800 tuner
Amplification:
Art Audio Diavolo and Conductor, Pair of XTZ Sub Amp 1's, Nick G 'Dual Phono' phono stage
Loudspeakers:
Bastanis Mandala Atlas with 15" sealed woofers
Cables:
Analysis Plus: Big Silver Oval speaker cables and Silver Oval-in interconnects, Mark Grant DSP 2.5 Dual Screened power cables
Record cleaning
Nitty Gritty 1.5Fi MK II
Senior Member
Location: London
Posts: 242
I'm Jay.
I've also sent PM, so if Steve57 ends up passing, please let me know.
Senior Member
Location: Finland
Posts: 365
I'm Juha.
Hi Jay.
You have the first refusal if Steve doesn't want to go ahead.
My Gear
Source components:
Garrard 401 in a solid birch plywood plinth / Trans-Fi Terminator T3Pro / ESCo modified Denon DL-103
Pioneer TX-9800 tuner
Amplification:
Art Audio Diavolo and Conductor, Pair of XTZ Sub Amp 1's, Nick G 'Dual Phono' phono stage
Loudspeakers:
Bastanis Mandala Atlas with 15" sealed woofers
Cables:
Analysis Plus: Big Silver Oval speaker cables and Silver Oval-in interconnects, Mark Grant DSP 2.5 Dual Screened power cables
Record cleaning
Nitty Gritty 1.5Fi MK II
Senior Member
Location: Finland
Posts: 365
I'm Juha.
The plinth was designed by Russ to take two tonearms, one 12" on the right upper corner and one 9" or 10" on the left upper corner of the plinth, SME included. Pictures have been requested by many to show the position of the 6mm hole drilled for the Terminator T3Pro, so here we are:
[IMG][/IMG]
My Gear
Source components:
Garrard 401 in a solid birch plywood plinth / Trans-Fi Terminator T3Pro / ESCo modified Denon DL-103
Pioneer TX-9800 tuner
Amplification:
Art Audio Diavolo and Conductor, Pair of XTZ Sub Amp 1's, Nick G 'Dual Phono' phono stage
Loudspeakers:
Bastanis Mandala Atlas with 15" sealed woofers
Cables:
Analysis Plus: Big Silver Oval speaker cables and Silver Oval-in interconnects, Mark Grant DSP 2.5 Dual Screened power cables
Record cleaning
Nitty Gritty 1.5Fi MK II
Reply With Quote
