+ Reply to Thread
Results 1 to 10 of 276

Thread: Gator aid. Or how to get the most from your Gator.

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    Join Date: Feb 2011

    Location: Singapore

    Posts: 13
    I'm Mervin.

    Default

    Quote Originally Posted by Werner Berghofer View Post
    Well, usually Stan delivers exactly – and very quickly, by the way – what’s been asked from him. If you ordered a Caiman+ with a Gator PCB, I’m pretty sure this is what has been shipped to you.

    I use two gatorized Caiman DACs: one in my desktop system, and the other one in the living room. The Caimans replaced the TC-7520 models. I did not compare the output volume by measuring with a reference microphone, but the volume dials on both amplifiers had to be turned a little bit more counter-clockwise when I added the Caiman DACs to the audio chain. At least on my systems, dynamic range and output volume was increased due to the Gator PCBs.
    Yes, my Caiman+ did come with the Gator pcb as ordered. It is, however several dB softer than my other dacs (probably 2-3dB softer than the standard 2.0V rms, although I have not measured.

    I could not resist the urge to add more teeth to my Gator, so I've applied the standard Murata reg (+5V only), better supply caps mods to the receiver/dac board. The sound, which was already good to begin with, started to get more 'life', but lacked the body / authority that my best dacs provided (highly modded Channel Islands VDA-1, Zhaolu 2.0). I looked carefully at the supplies for the Gator, and felt that given the lengths of pcb tracks taken by the supplies (+15V, +12V regulated), some extra caps would be useful. I used Silmic IIs. The results? Superb. This added body to the sound, without taking away the refinement and detail.

    There is not much space on the top or bottom of the Gator pcb, but I added caps on the bottom. Cap sizes are "to taste", and I used a range between 22uF and 470uF. For Silmics space is a premium and I have not tested different sizes for optimal sound.
    Last edited by mervinb; 23-03-2011 at 04:04. Reason: typos!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •