+ Reply to Thread
Page 12 of 60 FirstFirst ... 2101112131422 ... LastLast
Results 111 to 120 of 595

Thread: Caiman Mods

  1. #111
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by toad View Post
    thanks leo....

    drat...that wasn't the reply i was hoping for as i ordered them a week ago...

    alright then....16v caps it is...
    You got a multimeter Toad? you may be able to use a couple or more of the 6.3v BG's rather than waste them, I can't remember the voltages going to all those caps, if you measure the stock ones you'll know which maybe ok if that makes sense, long as the voltage is lower than say 6v, I personally like plenty of headroom regarding the caps max rated voltage

    The 6.3v you have spare, well you could try them on the dacs 5v supply pins, BG N types are suited as both coupling or decoupling
    Cheers,
    Leo

  2. #112
    MartinT Guest

    Default

    Ever seen an exploded electrolytic? Personally, I wouldn't risk the nice insides of the Caiman.

  3. #113
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by MartinT View Post
    Ever seen an exploded electrolytic? Personally, I wouldn't risk the nice insides of the Caiman.
    Yes and also tants, not the prettiest of sights
    Cheers,
    Leo

  4. #114
    Join Date: Dec 2009

    Posts: 8

    Default

    thanks again leo for the assistance...

    i do have a MM...

    i'll have a boo at those caps to see who is doing what....

    where would the dac's 5v supply pins be located...?

  5. #115
    Join Date: Nov 2008

    Location: Valley of the Hazels

    Posts: 9,143
    I'm AMusicFanNotAnAudiophile.

    Default

    Quote Originally Posted by toad View Post
    thanks again leo for the assistance...

    i do have a MM...

    i'll have a boo at those caps to see who is doing what....

    where would the dac's 5v supply pins be located...?
    This any use ?

    http://www.wolfsonmicro.com/uploads/...nts/WM8716.pdf

    Chris

  6. #116
    MartinT Guest

    Default

    Ok, I've got the two Dexa regulators (+12V and +5V modules marked 'NewClassD') in place. Angled as shown, they just fit snugly inside the cover. They also feature tiny blue LEDs to show that they're working properly. Output voltages are spot-on using the Caiman 15V PSU. I have deliberately not performed the capacitor upgrades yet as I wanted to hear what the regulators do.

    Listening to it now, the Caiman has improved focus (up to that of my Ayre C-5xe) and extended and growly bass (almost up to the Ayre's admittedly high standard). It sounds fab playing films and CDs from my Blu-ray player as transport. I cannot test Sky HD as I have no signal since my dish got clogged with snow.

    Altogether a very worthwhile improvement and fun!

    Last edited by MartinT; 27-11-2012 at 07:18. Reason: Changed photo hosting

  7. #117
    Join Date: Mar 2009

    Location: Sheffield

    Posts: 442

    Default

    Hi Martin,

    Nice work. How much did the Dexa's cost?

    Can you detect much sound difference over the stock regulators?

    Regards

    Chris

  8. #118
    MartinT Guest

    Default

    Thanks. They cost $39.95 each from Parts Connexion here:

    http://www.partsconnexion.com/regulator_dexa.html

    As I said, the main improvement is over focus, which is now extremely good. This gives very precise positioning in the stereo stage and a spacious feel with very low noise floor.

  9. #119
    MartinT Guest

    Default

    Before I go ahead can I please confirm which are the four electrolytic capacitors to be replaced for just the fixed line level output?

  10. #120
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    The 4 with red dots on, top and bottom left ones input to op-amp, top and bottom ones on right are op-amp output

    Cheers,
    Leo

+ Reply to Thread
Page 12 of 60 FirstFirst ... 2101112131422 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •