Quote Originally Posted by RobbieGong View Post
Sorry Mick just seen this.

The truth is that where and how the MN bearing sits without the base plate really is not ideal for the solid, well engineered precision thing it is.
Have a look at posts 3 and 4 here and you'll see that three screws basically screw to the aluminum floor body http://theartofsound.net/forum/showt...ing-Base-Plate

If you look closely at posts 7 and 8 you'll see that the applied 6mm base plate provides a far better, firmer more solid foundation for something like the substantial MN bearing, which can only allow it to function, optimally I'd say.

Sound wise it would be hard for me to say as I'm known to often change more than one thing at a time which was the case here.
I wanted all the right upgrades and this was part of that for me.
As well as the sense of knowing that the bearing is secured, solidly, firmly, towards optimum from that great bearing, I'm in no doubt that it is of further benefit and improvement where it matters which is the music, no matter how small an equation it adds to the whole picture so to speak

I'd advise anyone doing the bearing to also do the bearing base plate, cause it makes sense and not every upgrade provides big improvement to the ears like cable a cart or speakers as not all upgrades work that way
I suppose it's a thing I will have to do. I have come this far and as said structurely it will pull it all together. Has anyone attempted to make one as it's not a thing you see on sale to often.