Jim,do you make any for 5ft. electrostatics?![]()
Jim,do you make any for 5ft. electrostatics?![]()
Well, I could, but quite obviously, Ali my man, you won't be needing them.
Alan, you are a highly perceptive young man. Thank you and enjoy. I know you will.
Last edited by jimdgoulding; 23-04-2008 at 20:18.
Hear your music, not your speakers
Location: gone
Posts: 11,510
I'm gone.
Review the 3rd .....
I've been playing some more with JimG's anti-diffraction baffles. My latest hodgepodge of available parts has the tweeters on my Bowers Active Ones surrounded by the rectangular baffle originally intended to fit around a ribbon tweeter, and a selection of offcuts butchered from baffles intended for a small midrange unit to go around the mid cones (sadly too small for the 6 inch mids on my Actives).
Effective as the tweeter baffle is, I suspect the biggest improvement is from surrounding the midrange cones with anti-diffraction baffle segments.
See pic below for current arrangement.
Hmmmm ..... I'm really not sure I can live without these baffles now. Remove them and the sound seems diffuse, smeared and badly focussed. Damn, but these things work well!
_____
Jim also sent me a set of baffles specifically tailored for the Actives' tweeters, but *shock*horror* they are light-ish grey, rather than the rather fetching black of my original baffles (purchased for my abortive attempt at owning ProAc Future Point Five speakers). Just a no-go aesthetically, for me - I listen with the speaker grilles off and the light grey slabs on the black speaker baffles is just too eye-catching and off-putting. They do sound marginally better than the 'ribbon baffles' though.
Shall I send 'em back to you , Jim?
.
Lounge:
Samsung QE65QN80F 65" QLED TV
Echo Link streamer
RME Audio ADI-2 FS (AK4493) DAC
XMOS DSD Async
Emotiva A2+ power amplifier
Neat Motive SX1 speakers
Van Damme 4.00mm tour grade speaker cable
Audiocrast Spreizbar banana plugs
Chord Clearway XLR interconnects
Audioquest Crimson USB interconnect
QED Quartz Reference optical interconnect
Studio:
2022 MacBook Pro 14" M1 Pro 10/16/16/16
SMSL SU-1 DAC
Modified Fosi P4 preamp
Adam Audio T5Vs
Fenton 10" active sub
Fosi V1.0G integrated amp
Roxel RBS 300s
Several small valve preamps
Jerry- Good news. Better listening through simple science. You are in good company. Dunlavy, Vandersteen, Wilson, Escalante, Green Mountian Audio (fantastic two ways), and going back as far as the Rogers BBC Monitors which I once owned are progenitors of the use of compressed wool felt on the surface adjacent to tweeters. The leading edge and upper end of our midrange is produced by our tweeters and this is how instruments are rendered in sound and image. Minus early refection off our baffles, all will do a better job of this. Space becomes more intelligible, too. My contribution is to make this available as a high quality after market product custom fitted to practically any conventional speaker.
You can help promote my product and theory over at WigWam if you will. All you guys using my product can if you visit that site. I happen to know that Jerry does. You may give your "too grey" surrounds to a friend. Preferably one who contributes to that forum if you have one.
I'm always happy to hear positive feedback. I've had a lot but never tire of it.
Thanks, mate.
Hear your music, not your speakers
I'm glad that Jerry's tried them and 'seen the light', so to speak. I knew Jim's product would work because Rob waxed lyrical about its benefits and he's not often wrong
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Location: gone
Posts: 11,510
I'm gone.
OK. I've just put a review thread on the Wam. I only do this for products I really believe in - so you should feel honoured indeed, Jim!
Apart from anything else, I expect quite a lot of flak will be coming my way! Prepare to repel boarders!! - lots of doubting-Thomases who fancy themselves as technical gurus are on the WigWam!Lots of talented/knowledgable folk, too, mind.
Last edited by jandl100; 04-05-2008 at 15:01.
.
I do feel honored and I thank you. I will register there today. No worries about flak. It's an opportunity to turn water into wine. I think I'm up to it. We'll see, shalt we.
Hear your music, not your speakers
Location: gone
Posts: 11,510
I'm gone.
Careful Jim - you may need to register as a dealer - and that's a £50 a year tarrif. You risk getting banned otherwise. Drop James (Wigwam admin/owner) a PM/email - james@hifiwigwam.com to make sure all is well.
.