+ Reply to Thread
Page 136 of 166 FirstFirst ... 3686126134135136137138146 ... LastLast
Results 1,351 to 1,360 of 1659

Thread: Mod your Beresford 7520

  1. #1351
    Join Date: Feb 2008

    Location: Down South

    Posts: 2,411
    I'm Neal.

    Default

    Quote Originally Posted by DaveK View Post
    Hi Leo,
    Thanks for your input and support for JMJ - after the last time I mentioned his name on the forum I thought I might be the only guy here that appreciated him - welcome to the club (of two !!).
    Don't know whether you've read the earlier posts (forgive me if you have) but Jerry suggested listening to JMJ 'cos he knows I'm very familiar with how it should sound as I had mentioned that my set up appeared to have developed a boomy bass when playing Streisand's new CD. I now know the CD is faultier than my set up.
    Cheers,
    Why is the CD faulty? It could be there is more low bass on the Streisland CD and your setup with 2132 is incapable of reproducing it properly...if the bass becomes more controlled with the volume turned down then that indicates to me a problem somewhere....IE the 2132 or you may have an issue elsewhere.... I find the 2132 has a similar effect in my system.....
    Listening in a Foo free Zone...

    Only a Sith deals in absolutes.

  2. #1352
    Join Date: Apr 2009

    Location: Sheffield

    Posts: 2,025
    I'm Confused.

    Default

    Quote Originally Posted by NRG View Post
    Why is the CD faulty? It could be there is more low bass on the Streisland CD and your setup with 2132 is incapable of reproducing it properly...if the bass becomes more controlled with the volume turned down then that indicates to me a problem somewhere....IE the 2132 or you may have an issue elsewhere.... I find the 2132 has a similar effect in my system.....
    Hi Neal,
    Thanks for your input - must admit that I never thought of that possibility . On the evidence that I "may have a issue elswhere" would you be able to hazard a guess as to the best place to start looking?
    Having thought about it a bit more I'm not sure that it really matters if it is only the Streisand CD that I have a problem with - I am not a big bass freak, enough is nice (very desirable) but too much is to be avoided, so if my system fails to reproduce the very low bass, which doesn't seem to occur too often, I can live with it quite happily.
    I would also say that I have not had the same boomy bass problem with any of my other sources (2 x TTs, 1 multi purpose Blu-ray Player (on which I've played Kodo Drummers DVD), 1 multipurpose DVD player, 1 Marantz CD-63 MkII player, 1 multimedia Vaio PC and 1 Sky HD box.
    Cheers,
    DaveK.

    My System:
    Power: Belkin PF40, Custom.hifi.cables Hydra and DC PSUs.
    Sources: Self built HTPC with Xonar ST sound card, NAD T585 multi disc player, Sony BDP-S350, Squeezebox Touch, Techncs SL1210 (mod'd) + Nagaoka MP30, Thomson Sky HD box.
    Amps etc.: 2 x Mini-T amps, MF-X10D Valve buffer clone, StanDAC 7520/Caiman (mod'd).
    Speakers: Mission 774s with added super tweeters
    Cables: best I can afford and likely to change except Homar's RF attenuated co-ax's and Mark Grant USB and HDMI cables. I also like silver i/cs and speaker cable.

  3. #1353
    Join Date: Oct 2008

    Location: Glasgowshire

    Posts: 10,638
    I'm Gary.

    Default

    Quote Originally Posted by Covenant View Post
    Well the Sabre is the pinnacle I suppose, so its good to have it used as a comparison.Would a factor why three of use like the 2132 so much be that we all have Mikes cables?
    Looking forward to finding out if there is any more good op-amps to try. Have you considered any of the discrete ones?
    The 2132 works great with other cables too, I'm using an NVA super Sound Pipe.
    Sounds great!
    Ok with not having it on Betamax nowadays

  4. #1354
    Join Date: Feb 2008

    Location: Down South

    Posts: 2,411
    I'm Neal.

    Default

    Ah, found it...not so much a list but some recommendations made by Leo back in 2005(!) when I was modding an MF X-Act... Intermixed with what we know already we have:

    OPA2132(!), 2604, 2111, AD826, OP275 then we have our LM4562 and also the OPA2107 (gets good write ups) and AD8066....
    Listening in a Foo free Zone...

    Only a Sith deals in absolutes.

  5. #1355
    Join Date: Oct 2008

    Location: Aughton, Ormskirk

    Posts: 2,855
    I'm Jerry.

    Default

    I would like to try the OPA2107 but it appears to need an adapter so I assume that means it needs an extra capacitor. Too much hassle methinks....
    Jerry
    Hifi: IPL transmission line floorstanding speakers, Squeezebox Touch, Denafrips Ares 11 DAC, DCB1 Pre-amplifier, Croft Series 7 power amp.
    Custom Hifi cables HA10SE headphone amplifier and Hifiman HE-400 headphones.
    AV system: LG 55B7, Denon AVR -x2300w receiver, Quad 12L (front) 11c Centre and 11L rear . Velodyne DD15 subwoofer.

  6. #1356
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    OPA2107 is available as 8pin DIL so is a straight fit
    Cheers,
    Leo

  7. #1357
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by NRG View Post
    Ah, found it...not so much a list but some recommendations made by Leo back in 2005(!) when I was modding an MF X-Act... Intermixed with what we know already we have:

    OPA2132(!), 2604, 2111, AD826, OP275 then we have our LM4562 and also the OPA2107 (gets good write ups) and AD8066....
    Bloomin heck, that was ages ago
    Think we learned a bit more since then
    Last edited by leo; 05-10-2009 at 21:26.
    Cheers,
    Leo

  8. #1358
    Join Date: Oct 2008

    Location: Aughton, Ormskirk

    Posts: 2,855
    I'm Jerry.

    Default

    Quote Originally Posted by leo View Post
    OPA2107 is available as 8pin DIL so is a straight fit
    So it is! Do you think its worth paying extra for Burr Brown over TI Leo? Burr Brown is a lot dearer but still a cheap upgrade.
    Jerry
    Hifi: IPL transmission line floorstanding speakers, Squeezebox Touch, Denafrips Ares 11 DAC, DCB1 Pre-amplifier, Croft Series 7 power amp.
    Custom Hifi cables HA10SE headphone amplifier and Hifiman HE-400 headphones.
    AV system: LG 55B7, Denon AVR -x2300w receiver, Quad 12L (front) 11c Centre and 11L rear . Velodyne DD15 subwoofer.

  9. #1359
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    I couldn't say for sure which would be better mate, they should be same but as we know isn't always the case.
    Its no longer Burr Brown, its taken over by Texas instruments , the Burr Brown stamped ones will be older and probably leaded where as the TI ones will probably be lead free

    Its possible you pay less for one with TI in the description but the chip may be stamped BB
    Going by the OPA2132 I found the leaded version to sound smoother but boomier in the bass, if this applies to the OPA2107 I dunno tbh
    They may sound the same, the OPA2107 I have is BB stamped in white and definitely leaded

    I'll pop it back in and let it run for a few days, currently have OPA2111 which was sounding nice but went bass light over a few days
    Cheers,
    Leo

  10. #1360
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    BTW I have an original philips NE5532AN which I'm going to compare against the NE5532P which was fitted in the 7520
    Cheers,
    Leo

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •