+ Reply to Thread
Page 12 of 20 FirstFirst ... 21011121314 ... LastLast
Results 111 to 120 of 191

Thread: How good is a fully upgraded Technics SL-1210mk2 compared to other high end TT?

  1. #111
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,504
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    No-one was asking you to buy one......

    If you did though, and didn't like it, given its relative rarity (due to increase once all remaining stocks have been exhausted), I suspect you'd have no problem moving it on and getting your money back

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  2. #112
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,187
    I'm Kevin.

    Default

    I know nobody was. It would just make an interesting comparison while I still have Strata here on loan.

    A valid point about shipping it on.
    More food for thought....
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  3. #113
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,504
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Indeed. If you bought the Nagaoka, and didn't like it, I'm almost certain that within an hour of advertising it for sale here, it'd be gone. Therefore, at worst, call it £120 to partake in an interesting experiment, and at best, it could be just the solution you're looking for

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  4. #114
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,187
    I'm Kevin.

    Default

    Yep, but I hope to place the order for the FH3s this month.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  5. #115
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,504
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Wosser FH3s when they're at home?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  6. #116
    Join Date: May 2012

    Location: Toulouse, France

    Posts: 7,187
    I'm Kevin.

    Default

    Electricbeach FH3 speakers.
    Kevin

    Too busy enjoying the music....

    European loan coordinator for Graham Slee HiFi system components..

  7. #117
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,614
    I'm Geoff.

    Default

    Quote Originally Posted by CageyH View Post
    Electricbeach FH3 speakers.
    Hmm. Frugel Horns. They should be interesting. What sensitivity are you looking at with those Kevin?

    I reckon you're going to need some super smooth and sweet valve amplification there.
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  8. #118
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,504
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by CageyH View Post
    Electricbeach FH3 speakers.
    Ah, I see... Knew nowt about those. Enjoy!

    Marco,
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  9. #119
    Join Date: Sep 2009

    Location: Essex, UK

    Posts: 3,439
    I'm Andy.

    Default

    Quote Originally Posted by Marco View Post
    Ah, I see... Knew nowt about those. Enjoy!

    Marco,
    Fort ewe knew everything master.
    System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+

    Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;


    1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands

    2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.




















    Me so horny- Impulse H6 Horny

  10. #120
    Audio Al is offline Pishanto Specialist & Super-Daftee
    Join Date: May 2012

    Location: Dagenham Essex

    Posts: 11,184
    I'm Allen.

    Default

    Quote Originally Posted by Tarzan View Post
    Fort ewe knew everything master.
    No No No

    That was my ex wife
    [

+ Reply to Thread
Page 12 of 20 FirstFirst ... 21011121314 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •