+ Reply to Thread
Page 1 of 4 123 ... LastLast
Results 1 to 10 of 34

Thread: Cyrus amp and Mission Speakers

  1. #1
    Join Date: Mar 2014

    Location: Oldham

    Posts: 95
    I'm Ray.

    Default Cyrus amp and Mission Speakers

    How would a Cyrus Amp pair up with a pair of Mission 751's?

    I have heard that older Cyrus Amps (I, II and III) are better that their newer ones - what's the opinion here? Will a PSX power supply make a real difference here?

  2. #2
    Join Date: Feb 2014

    Location: Huntingdonshire

    Posts: 1,412
    I'm Andrew.

    Default

    Well.
    One and two are great, not heard three.
    Yes.

  3. #3
    Join Date: Dec 2011

    Location: South downs

    Posts: 3,477
    I'm James.

    Default

    I used a III with some 751 once upon a time, sounded good to me ! The III was an upgrade over the Pioneer A400 I was using previously... Not heard one with the PSXR but never felt I was missing out.

    Have also used I & II at various times, they're okay but getting very flakey at this age & will require some serious servicing sooner rather than later.

  4. #4
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,319
    I'm Martin.

    Default

    I've heard a mark I into Mission 761. Terrible, terrible sound; one of the worst 'proper' hi-fi systems I have ever had the misfortune to be subjected to. Worse than anything I've ever put together and that's saying something.

    Not sure what was wrong and may well not be the fault of the amp but it put me off them. This was late Eighties so both amp and speakers were relatively new.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  5. #5
    Join Date: Dec 2011

    Location: South downs

    Posts: 3,477
    I'm James.

    Default

    I found the I / II good with vinyl sources but rough as rats with digital... What was the source Martin ? IIRC 761's were relatively alright budget jobbies.

  6. #6
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,319
    I'm Martin.

    Default

    Digital source. A Mission cd player.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  7. #7
    Join Date: Dec 2011

    Location: South downs

    Posts: 3,477
    I'm James.

    Default

    Quote Originally Posted by Macca View Post
    Digital source. A Mission cd player.
    Say no more !

  8. #8
    Join Date: Oct 2011

    Location: London Town

    Posts: 2,441
    I'm Julian.

    Default

    Quote Originally Posted by raygreen View Post
    How would a Cyrus Amp pair up with a pair of Mission 751's?

    I have heard that older Cyrus Amps (I, II and III) are better that their newer ones - what's the opinion here? Will a PSX power supply make a real difference here?
    I auditioned both Cyrus I and II when they were originally being sold. I liked II a lot - quite a step up from the cheaper amp, and I remember finding that the PSX really did make a worthwhile difference.

    Problem is with these old Cyrus amps is that they can fetch really silly money on ebay.

    I must admit the Mission speakers wouldn't be my first choice. Given the nature of the Cyrus house sound, unless you want something really in your face, IMO you need to pair them with a neutral speaker or something on the warm side, otherwise you might find the sound rather fatiguing.
    Sonore Rendu - Cambridge Audio Edge W - Sonus Faber Venere 2.5

  9. #9
    Join Date: Mar 2014

    Location: Oldham

    Posts: 95
    I'm Ray.

    Default

    Quote Originally Posted by julesd68 View Post
    I auditioned both Cyrus I and II when they were originally being sold. I liked II a lot - quite a step up from the cheaper amp, and I remember finding that the PSX really did make a worthwhile difference.

    Problem is with these old Cyrus amps is that they can fetch really silly money on ebay.

    I must admit the Mission speakers wouldn't be my first choice. Given the nature of the Cyrus house sound, unless you want something really in your face, IMO you need to pair them with a neutral speaker or something on the warm side, otherwise you might find the sound rather fatiguing.
    I also have a pair of Celestion DL6 which are perhaps a little more neutral sounding. Would these be better suited to a Cyrus amp. Would something like a Rega Mira pair up better with the Missions?

  10. #10
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,600
    I'm Geoff.

    Default

    Not wishing to disillusion anybody, but I've used the Cyrus I and II amps and in my opinion I'd sooner save money and get a Denon PMA-250SE or PMA-255 or even better a PMA-350SE. The Denons are available for less money, are well made, sound better (in my opinion) and have enough power to drive a decent speaker. They aren't speaker fussy either.

    I've had a couple of PMA-350SE amps and each time I get my hands on one, I'm always amazed how good they sound for such modest money.
    It is impossible for anything digital to sound analogue, because it isn't analogue!

+ Reply to Thread
Page 1 of 4 123 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •