Trade: The Right One
Location: Far Away
Posts: 1,373
I'm Gone.
In my experience, using the Loricraft type soft nylon brush and a fluid with the correct low surface tension that actively flows into the grooves is the best way to go. The brush needs to by less hard than the vinyl.
Failing a brush, then a micro-fibre cloth should be used.
Senior Member
Location: Birmingham
Posts: 7,295
I'm James.
That's why I use a piece of draught excluder brush. Softer than vinyl and just the right amount of flexibility for the job.Originally Posted by PaulStewart
Senior Member
Location: Shropshire
Posts: 2,433
I'm Anto.
Some super tips on here folks!!
I am due in for an op in a day or 2 and have been getting together the germs of an idea to make my own RCM
An old Columbia wind up gramaphone and a modified wet and dry hoover , and a Knosti ,and away to go
I only ride 'em, I don't know what makes 'em work
Senior Member
Location: Lincoln UK
Posts: 725
I'm Mark.
Microfibre cloth good idea I will give it a try, need to make some solution up too !
Life long music lover and Hi-Fi enthusiast for over 40 years, avid live music supporter, dismayed by the current dynamic ticket pricing applied to so many events !!
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Paul just cleaned a couple of LPs with your right stuff cleaning fluid and I am impressed it is very nice
I didn't use any distilled water rinsing after just the fluid in both directions vacuum then dry for 10 mins
Do you recommend rinsing after cleaning ?
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Don McCorleone
Location: Galashiels
Posts: 14,031
I'm inthescottishmafia.
I've used Paul's fluid for a while now, never rinsed.
Best I've tried so far.
“Music has always been a matter of energy to me, a question of fuel. Sentimental people call it inspiration, but what they really mean is fuel. I have always needed fuel. I am a serious consumer. On some nights I still believe that a car with the gas needle on empty can run about fifty more miles if you have the right music very loud on the radio”
Hunter S Thompson
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,524
I'm AudioAl'sArbiterForPISHANTO.
+1 (with bells on). IMO, there is no equal!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Trade: The Right One
Location: Far Away
Posts: 1,373
I'm Gone.
Hi All,
Glad you like "The Right One" fluid, Alan no don't rinse, there is no need to and as far as I can tell there is more chance of static returning with rinsing. As i posted in Trade Impressions, I now have stock of the Loricraft type soft nylon brush and the natural fibre dry brush too. The are in stores.ebay.co.uk/rebirthofthecool but PM me andthere is a deal for AoS members on these as well as the fluid.
Cheers
Banned
Location: Huddersfield
Posts: 3,358
I'm David.
Yes this is deffo the best record cleaning fluid bar none, well done chief!
Senior Member
Location: Falun, Sweden
Posts: 2,243
I'm Mike.
Was wondering why the label says " make sure the record is fully dry before playing..."?
/Mike
Posting Permissions
Reply With Quote