Member
Location: Newtownards, Belfast
Posts: 35
I'm Gavin.
House of Celestion
Here are a few pictures of my Celestions. The collection has been expanding quite quickly recently as I have been snapping up any local sales.
Celestion Ditton 662 & 15 XR
Modified 15 XR
[IMG][/IMG]
Celestion Ditton 33
Celestion A3
Unfortunately I don't have any photos of the other equipment, but I'll get round to that some day.
My Equipment: CD Players - Creek Destiny, Sonneteer Bronte, Roksan Kandy KC1-MkIII, Marantz CD63 mk2, Toshiba XR-J9: Pre-Amp - Sugden C28, Rotel RC-972: Power Amp - Yamaha Natural Sound MX-2, Bridged Rotel RB-850s: Integrated Amps - XTZ Desire A100D3, Kenwood KA7020, Pioneer SA-540: Loudspeakers - Celestion A3, Celestion Ditton 662, Celestion Ditton 33, Celestion Ditton 15 XR, TDL RTL3, Wharfedale Diamond IV, Shan Shimna, Mission 760i.
My Blog: http://artmincnc.blogspot.co.uk/
Trade: hifipig
Location: France. Yup, still France>
Posts: 640
I'm Stu.
Had a pair of Celestion A1s a few years ago - they're the younger sibling of the A3 s above. Fabulous loudspeaker and an absolute bargain if you can find them!
Hifi Pig snoofling out what's hot in hifi.
Member
Location: Newtownards, Belfast
Posts: 35
I'm Gavin.
Hi Stu. Yes, the A1 is a lovely loudspeaker too.
I still feel that I need more grunt in my power amp for the A3s. Anybody have any suggestions?
My Equipment: CD Players - Creek Destiny, Sonneteer Bronte, Roksan Kandy KC1-MkIII, Marantz CD63 mk2, Toshiba XR-J9: Pre-Amp - Sugden C28, Rotel RC-972: Power Amp - Yamaha Natural Sound MX-2, Bridged Rotel RB-850s: Integrated Amps - XTZ Desire A100D3, Kenwood KA7020, Pioneer SA-540: Loudspeakers - Celestion A3, Celestion Ditton 662, Celestion Ditton 33, Celestion Ditton 15 XR, TDL RTL3, Wharfedale Diamond IV, Shan Shimna, Mission 760i.
My Blog: http://artmincnc.blogspot.co.uk/
Senior Member
Location: Newcastle UK
Posts: 3,749
I'm Rich.
Nice pics, those 15 xr look very tidy. I have a pair of 15s, they look a bit tatty but still sound the business in stock form. What mods did you do on them?
One of these days... I'm going to cut you into little pieces.
Member
Location: Newtownards, Belfast
Posts: 35
I'm Gavin.
Hi Richard, nothing major, but there is a write up on them on my blog here: http://artmincnc.blogspot.co.uk/2013...rbishment.htmlOriginally Posted by RichB
My Equipment: CD Players - Creek Destiny, Sonneteer Bronte, Roksan Kandy KC1-MkIII, Marantz CD63 mk2, Toshiba XR-J9: Pre-Amp - Sugden C28, Rotel RC-972: Power Amp - Yamaha Natural Sound MX-2, Bridged Rotel RB-850s: Integrated Amps - XTZ Desire A100D3, Kenwood KA7020, Pioneer SA-540: Loudspeakers - Celestion A3, Celestion Ditton 662, Celestion Ditton 33, Celestion Ditton 15 XR, TDL RTL3, Wharfedale Diamond IV, Shan Shimna, Mission 760i.
My Blog: http://artmincnc.blogspot.co.uk/
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
Any ideas of the 150 model? I think it offered updated styling, a further revised bass-mid driver and the mesh covered tweeter dome, but I have no other info on it.
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,778
I'm Andrew.
Great collection, I own a super modified pair of 15XR's which I use with a number of systems. Do you think you'll ever get a pair of 66's?
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Senior Member
Location: gone
Posts: 11,510
I'm gone.
Nice photos - lovely collection. Go on - show us the rest!
.
Senior Member
Location: South Beds, UK
Posts: 4,595
I'm Mike.
My son has had my Celestion A1's for the last 3 or 4 years and I have just acquired a pair of Ditton 44's.
Both quite wonderful speakers and the 44's in particular have been quite a revelation, although I still haven't quite got the amp / speaker match right I feel.
He with least money has most to sell
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,778
I'm Andrew.
You don't need much of an amp to power these beasts, I have a pair of these as well. I preferred valves when using mine but SS can sound good as well. Anything upto 50-60 watts should more than ample to drive the big 12" bass drivers on these classics, can you tell I love celestion vintage speakers ???
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Reply With Quote
