+ Reply to Thread
Page 8 of 28 FirstFirst ... 67891018 ... LastLast
Results 71 to 80 of 273

Thread: Random bike shots from the north..

  1. #71
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,508
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Lol, yeah... However, I'm an 80s boy at heart!

    Must be nice and peaceful out there in the snow, relatively in the middle of nowhere... What time was it roughly when you took the picture?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  2. #72
    Join Date: Apr 2011

    Location: Finland

    Posts: 1,186
    I'm Mika.

    Default

    I'm guessing that the pic was taken somewhere between 6 and 7 PM..
    Loricraft / Garrard / SME / Transfiguration / Dynavector / Ensemble / Auditorium 23 / Shindo / RA / Audio Note / First Watt / Duelund / Altec

  3. #73
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,508
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Ah, so not exactly the witching hour.... Still, watch out for the boogie man coming out of those bushes and grabbing you!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  4. #74
    Join Date: Apr 2011

    Location: Finland

    Posts: 1,186
    I'm Mika.

    Default

    Thursday morning (eerrr, or was it Friday..) did see only few other commuters while riding to work and most of the time felt like a lone rider out there on the bike lanes. I'm guessing it was because of the weather as half past seven the thermometer showed -27 C temperature and in addition there was a small breeze going on.



    It's only question of the preparations i.e. clothing and the most important thing - the attitude. Of course if your bike can also cope with cold weather so that the lubricants at the bearings are not getting frozen and make your miserable, that is a big plus too. The factory grease in bike parts is many times too stiff for winter use in northern grounds. So when I buy new hubs etc usually will re-assemble the whole thing and add better stuff in before the winter season and the first cold fronts hits the north..
    Loricraft / Garrard / SME / Transfiguration / Dynavector / Ensemble / Auditorium 23 / Shindo / RA / Audio Note / First Watt / Duelund / Altec

  5. #75
    Join Date: Jan 2009

    Location: Glasgow

    Posts: 1,225
    I'm andy.

    Default

    Quote Originally Posted by Mika K View Post
    It's only question of the preparations i.e. clothing and the most important thing - the attitude. Of course if your bike can also cope with cold weather so that the lubricants at the bearings are not getting frozen and make your miserable, that is a big plus too. The factory grease in bike parts is many times too stiff for winter use in northern grounds. So when I buy new hubs etc usually will re-assemble the whole thing and add better stuff in before the winter season and the first cold fronts hits the north..
    Huh !!..thats exactly my thoughts when i saw your pic and read the text to -27 celcius, 1st thing came to my mind was the headset,hub,bottom bracket and derailleur greases must be Whale blubber based, i don't care if you are a Kamikazi but there's no way you could generate enough energy/revolutions in those conditions to get to anything like their working viscosity.
    Frank...made me do it.

  6. #76
    Join Date: Apr 2011

    Location: Finland

    Posts: 1,186
    I'm Mika.

    Default

    Already tired to see these random bike shots from the north? No worries - I have plenty of more to post as they just keep showing up to my camera without any effort. It's weird..



    This evening did a small ride to check out the new bridge recently opened up for public from the north side of the river Oulu to Toppila Isle. Not much to see but just wanted to check it out as most likely will use it occasionally when going to companys badminton hour to sports center located at the Isle. It's only 5km from our place to the bridge but somehow managed to ride two hours around the city
    Loricraft / Garrard / SME / Transfiguration / Dynavector / Ensemble / Auditorium 23 / Shindo / RA / Audio Note / First Watt / Duelund / Altec

  7. #77
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,508
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Awesome stuff, Mika, as usual. Could I ask how often you skid and fall on your arse?

    In those conditions, it must happen sometimes, surely?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #78
    Join Date: Jan 2009

    Location: Glasgow

    Posts: 1,225
    I'm andy.

    Default

    Quote Originally Posted by Marco View Post
    Could I ask how often you skid and fall on your arse?
    Marco.
    How rude !!! Mika is Finnish you know, they're 'king of skids' and probably drift round situations like a thoroughbred rally driver without a sweat.
    Frank...made me do it.

  9. #79
    Join Date: Apr 2011

    Location: Finland

    Posts: 1,186
    I'm Mika.

    Default

    Yes we might be bit weird here in the north but not almighty thou..



    So yes, I've fallen many times, usually thou this happens when it's really icy or slippery. Surprisingly thou for this winter season have not fallen yet? I guess the last time was during summer when playing some bike polo..
    Loricraft / Garrard / SME / Transfiguration / Dynavector / Ensemble / Auditorium 23 / Shindo / RA / Audio Note / First Watt / Duelund / Altec

  10. #80
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,508
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Ha - no doubt that picture was taken in the height of summer...

    Pah, REAL men don't wear vests (secretly, he's also wearing two pairs of his wife's tights under his pants, in case it gets cold)!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

+ Reply to Thread
Page 8 of 28 FirstFirst ... 67891018 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •