I guess the cutting down process should be relatively straight forward with some wire cutters etc so you can get them into the case of the 7520?
Member
Posts: 57
I guess the cutting down process should be relatively straight forward with some wire cutters etc so you can get them into the case of the 7520?
Senior Member
Location: NE Scotland
Posts: 496
I'm Jim.
Have a look here:Originally Posted by rhmjmango
http://shop.ebay.co.uk/merchant/yp53
Naim ND5 XS, nDAC, XP5 XS, 202, HC, NAPSC, 250.2, B&W 804s.
AVR350, B&W HTM4, Gallo.
Samsung, Oppo.
Member
Posts: 57
You should be on commission Trailer, just ordered a pair of 49720's for £12.49 shipped and have asked the seller to trim them down for me as he says he will do in the ad
Senior Member
Location: NE Scotland
Posts: 496
I'm Jim.
I wish!
Naim ND5 XS, nDAC, XP5 XS, 202, HC, NAPSC, 250.2, B&W 804s.
AVR350, B&W HTM4, Gallo.
Samsung, Oppo.
New Member
Posts: 23
You ordered the metal HA version right? Then the price is not right for a pair of these opamps. Am i right!You should be on commission Trailer, just ordered a pair of 49720's for £12.49 shipped and have asked the seller to trim them down for me as he says he will do in the ad
Senior Member
Location: NE Scotland
Posts: 496
I'm Jim.
Aye that's right. That's the price for one.You ordered the metal HA version right? Then the price is not right for a pair of these opamps. Am i right!
Naim ND5 XS, nDAC, XP5 XS, 202, HC, NAPSC, 250.2, B&W 804s.
AVR350, B&W HTM4, Gallo.
Samsung, Oppo.
New Member
Posts: 23
I know, i ordered one. What confuses me is their advice.
*We recommend using Black Gate (or similar) capacitors on the power rails for these opamps.
Who can comment on this recommendation?
Member
Posts: 57
Sorry yes I meant I bought them for £12.49 each - worded that one very badlyYou ordered the metal HA version right? Then the price is not right for a pair of these opamps. Am i right!
Senior Member
Location: Lancashire, UK
Posts: 125
The story so far:
I have replaced one of the THS4032's with a spare and all seems to be OK at the moment. I have not (as yet) fitted a decoupling cap - I'll see how it goes after a burn-in. Perhaps the chips are very picky and i've just fitted a good 'un.
I really do like the sound of there opamps with the K701's - They do very little wrong - Everything is there and in full control - Superb!
Ken
__________________________________
"Subtle is the Lord, but malicious He is not"
- Albert Einstein.
__________________________________
New Member
Posts: 23
Trailer, which op-amp is for the headphone, left or right one i the picture?
Well I've gone from the standard op-amps. Had the LM4562NA's in for a week or so now. Like I have said they were a big improvement over the standards.
Next step was to try out a pair of LME49720's and I've stuck them in this morning.
First impressions. The sound is a bit "leaner" and more "airier" than with the 4562's. I'll let them run in some more.
Reply With Quote
