Moderator
Location: High Peak, Derbyshire
Posts: 2,241
I'm Keith.
The seller has probably run out of stock of the item and rather than risk bad feedback should someone order whilst he has no stock, he's changed the price to something ridiculous to prevent anyone ordering. It will probably revert to a sensible price once he's re-stocked. This is very common practice.Originally Posted by Marco
Hahaha - what a tit!
Marco.
Keith
Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
CDP: Inca Katana SE
DAC: Beresford Caiman MkII (LiPo Battery powered)
Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target
Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595
Gallery
Senior Member
Location: Kent
Posts: 1,357
I'm Clark.
Hi Barry, They have a reputation for being very linear, but I've never heard a pair or seen any measurements to confirm this.20Hz - 20kHz +/- 0dB ?
I only know one owner who has a pair (in France) and he reckons they are better than his Goodmans Axiom 80's which have a very good reputation. He's not interested in measurement but says they are very natural sounding.
I thought I'd post the auction as the more obscure vintage hifi like these speakers rarely get any coverage here in the UK. It usually tends to be the same old Quad/Leak/Tannoy/Garrard/Thorens stuff that's been done to death so I thought this might be a breath of fresh air. But, maybe I'm wrong and there's no interest in this these lesser known gems.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,518
I'm AudioAl'sArbiterForPISHANTO.
I'm sure you're right, Keith, but that's right bloody stupid. What's wrong with putting a notice on the ad, which shows that said item is temporarily out of stock? Maybe that's just too simple in today's needlessly over-complicated world!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Moderator
Location: High Peak, Derbyshire
Posts: 2,241
I'm Keith.
Suspect it's ebay policies and stuff - you're not allowed to advertise something you haven't got stock of. I imagine the seller has multiple outlets (ebay, own website, physical shop etc), so running out of stock probably happens from time to time and this is a simple way of getting round it and staying within ebay's rules.I'm sure you're right, Keith, but that's right bloody stupid. What's wrong with putting a notice on the ad, which shows that said item is temporarily out of stock? Maybe that's just too simple in today's needlessly over-complicated world!
Marco.
Keith
Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
CDP: Inca Katana SE
DAC: Beresford Caiman MkII (LiPo Battery powered)
Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target
Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595
Gallery
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,518
I'm AudioAl'sArbiterForPISHANTO.
Mmmm, again you're probably right... I'm saying nothing more, but I'm sure you know what I'm thinking!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Fount Master & Administrator
Location: Essex
Posts: 37,730
I'm openingabottleofwine.
Well they certainly look the business and in very good condition. My query was that no speaker in existence has a totally flat frequency response. To quote a response +/- 0dB is absurd and doesn't lend the seller any credence.
Regards
Barry
ELP Fanboy
Location: Yorks
Posts: 16,643
I'm Nobody.
One of my fav Belt drives
http://www.ebay.co.uk/itm/Classic-Tr...item2ec43357d6
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,518
I'm AudioAl'sArbiterForPISHANTO.
From a design perspective, I love it! Dunno about a sonic one...
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
ELP Fanboy
Location: Yorks
Posts: 16,643
I'm Nobody.
HiFi Daves gonna leave me his 'Prisma' in his will.. He's a good lad. Some nice blokes on here. Jonboys a good lad too, ive got his lafayette valve amp in his will also
Senior Member
Location: Kent
Posts: 1,357
I'm Clark.
I just thought that the speakers themselves might provoke some interest rather than the sellers text..
It seems that this is the wrong forum for this more esoteric kind of stuff when an overpriced crappy connector seems to generate more interest and comment.
Posting Permissions
