Hehe... Only if you can barge past me first
Marco.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,508
I'm AudioAl'sArbiterForPISHANTO.
Hehe... Only if you can barge past me first
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Sony Fanboi
Location: Mid Lincs
Posts: 1,445
I'm Buffet-blower.
I actually had an R a few years ago - got it from the States before it was imported officially into the UK. Seemed a bit more lively & open than the cooking one and had lower surface noise, if memory serves me right.Originally Posted by Marco
Could be an interesting one - the R is a nice upgrade over the standard 103
Marco.
Couple more pics...(my missus thinks I'm crackers)...
Last edited by Gromit; 13-03-2009 at 18:32.
Richard.
Round & round bits: LP12/Cirkus/Kore/Herc II/Roksan Nima/Hana EL
Megabits: Bluesound Node 2i/TEAC UD-H01 dac
Making it louder bits: Phonostage: Dynavector P75 Amp: Cyrus 8vs/PSX-R Speakers: Royd Sintra II
Connecting it together bits i/c's: Flashback Premier. Speaker cables: Van Damme Hifi
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,508
I'm AudioAl'sArbiterForPISHANTO.
That's the oneI actually had an R a few years ago - got it from the States before it was imported officially into the UK. Seemed a bit more lively & open than the cooking one and had lower surface noise, if memory serves me right.
It also has a damped bodyshell which doesn't suffer from the resonances of the standard model. The extended high frequency response also gives much greater musical insight.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Sony Fanboi
Location: Mid Lincs
Posts: 1,445
I'm Buffet-blower.
I've also thought the R has a different body material - it somehow seemed harder, more resistant to bolt-tightening (not that I ever do the bolts up very tight anyway) and even looks slightly different to the cooking 103.That's the one
It also has a damped bodyshell which doesn't suffer from the resonances of the standard model.
Marco.
Richard.
Round & round bits: LP12/Cirkus/Kore/Herc II/Roksan Nima/Hana EL
Megabits: Bluesound Node 2i/TEAC UD-H01 dac
Making it louder bits: Phonostage: Dynavector P75 Amp: Cyrus 8vs/PSX-R Speakers: Royd Sintra II
Connecting it together bits i/c's: Flashback Premier. Speaker cables: Van Damme Hifi
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,508
I'm AudioAl'sArbiterForPISHANTO.
Richard,
There's a coating applied to the body shell which aids rigidity and gives a 'gloss' finish. However the main difference, in terms of resonance, is that the internal of the body shell is damped by pads placed on each 'face' of the shell, which is completely absent in the standard model.
I only became aware of this after looking at pictures of the shells when someone had 'nuded' both cartridges.
One thing's for certain: there's a big difference between how both cartridges sound. The standard 103 hints at greatness; the 103R (and Pro) delivers it, and the 103SA puts the final icing on the cake!
Marco.
P.S Never over-tighten bolts - apart from risking damaging the body shell, it always sounds worse.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Alien Entity
Location: North East UK
Posts: 6,358
I'm InSpace.
Coz it's rubbish!
JK
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,508
I'm AudioAl'sArbiterForPISHANTO.
LOL - indeed. What actually happens though with over-tightening bolts is that you cause the body shell to twist slightly and it's this that affects performance.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Alien Entity
Location: North East UK
Posts: 6,358
I'm InSpace.
Blimey!... That took over ten minutes!... I thought you'd have a 'response' quicker than that!
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,508
I'm AudioAl'sArbiterForPISHANTO.
One day when you're as popular and important as me you'll find that you have more than one person to answer
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Alien Entity
Location: North East UK
Posts: 6,358
I'm InSpace.
Oh, I have no desire to ever be as impotent as you...
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Posting Permissions
Reply With Quote
