+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 35

Thread: 7520 with a SB3?

  1. #21
    Join Date: Feb 2008

    Location: Down South

    Posts: 2,411
    I'm Neal.

    Default

    Quote Originally Posted by Spur07 View Post
    ...and others that you can do just as well for half the cost of the Transporter.

    interesting.
    ...
    Unfortunatley not without a lot of DIY and understanding. Once you factor in the cost of an external DAC, super regulators for all the supplies, the new clock and clock supply, packaging, case etc you won't be far off the asking price for the Transporter!

  2. #22
    Join Date: Oct 2008

    Location: Southampton, UK and Nicosia, Cyprus

    Posts: 1,139

    Default

    Quote Originally Posted by NRG View Post
    Unfortunatley not without a lot of DIY
    I wasn't suggesting any DIY beyond connecting a SB3 or Duet by s/pdif to a stand alone DAC.

    In the Audiophile section here http://forums.slimdevices.com/forumdisplay.php?f=7 you will find two views: that the Transporter is worth the extra, and that it isn't.

    I can't say. I have not heard a Logitech Transporter

    http://www.slimdevices.com/pi_transporter.html

    It costs over £1000.
    Brian

    In Southampton: Raspberry Pi 4 running PiCorePlayer, Beresford Caiman SEG, Quad 77 Int Amp and CD Player, AVI Neutron 4, Sennheiser HD25 headphones.
    In Nicosia: Small Format HTPC, Beresford 7520 ,Quad 405-2, Quart 980s German Tower Loudspeakers.

  3. #23
    Join Date: Feb 2008

    Location: Down South

    Posts: 2,411
    I'm Neal.

    Default

    I didn't imply that you did

    An SB3 plus external DAC does not cut it against the transporter. I'm a member of the SD forums and have read the debates. In pure sound qaulity terms the transporter is way better, I've compared the two at length, to get the SB3 to the same level would take a lot of effort and skill, a challenge that a dedicted DIYer would probably relish. In terms of value that comes down to individual choice, if you want the best sound from a Logitec SB but can't hold a soldering iron the right way 'round then the Transporter or Mr Dixons SB+ represent good value...YMMV

  4. #24
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by NRG View Post
    I didn't imply that you did

    An SB3 plus external DAC does not cut it against the transporter. I'm a member of the SD forums and have read the debates. In pure sound qaulity terms the transporter is way better, I've compared the two at length, to get the SB3 to the same level would take a lot of effort and skill, a challenge that a dedicted DIYer would probably relish. In terms of value that comes down to individual choice, if you want the best sound from a Logitec SB but can't hold a soldering iron the right way 'round then the Transporter or Mr Dixons SB+ represent good value...YMMV
    I have to agree with you there Neal, I'm sure people are more than happy with a standard SB3 + external dac which is fine but its no way able to outperform something like the Transporter, the SB3 has design compromises as standard (its no dig at the thing especially for the price) , if you understand circuits then simply take one apart and you can see where these compromises are, no matter what external dac you use, de-jitter tricks on the SPDIF or I2S is just a bandaid, it takes time and work inside the SB3 to get the best out of it

  5. #25
    Join Date: Jul 2008

    Location: Surrey

    Posts: 782
    I'm Paul.

    Default

    Neal / Leo

    what can you expect with regard to driving the transporter with a dac?

    how 'high' would you have to go to hear a noticeable upgrade?

    judging by comments on the naim forum i'm guessing a lavry wouldn't cut the mustard.

  6. #26
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by Spur07 View Post
    Neal / Leo

    what can you expect with regard to driving the transporter with a dac?

    how 'high' would you have to go to hear a noticeable upgrade?

    judging by comments on the naim forum i'm guessing a lavry wouldn't cut the mustard.
    I think that would be down to personal taste tbh regarding the Transporters analogue out against a Transporter feeding an external dac where as a stock SB3 used either as a transport or source falls behind imo.
    It makes sense the cheapest ugrade for a SB3 owner is an external dac, the analogue outs of a SB3 isn't exactly that great


    With some work either by paying a company that knows what its doing or doing it yourself the standard SB's can be modified boosting its performance as a transport no end, even the analogue outs can be improved.
    Patric Dixons SB+ is a heavily modified SB3 and the reports are it betters the Transporter

    The only real main limitation of a SB3 stock or modded is that it cannot supply an external dac higher than 24/48 where as the Transporter can do 24/96

    As mentioned before a stock SB3 + external dac would be decent enough for a lot of people

  7. #27
    Join Date: Oct 2008

    Location: Aughton, Ormskirk

    Posts: 2,855
    I'm Jerry.

    Default

    Leo are you aware of anyone (individual or company) that offers SB3 upgrades in the UK? The only one I have come across is Audiocom.
    Jerry
    Hifi: IPL transmission line floorstanding speakers, Squeezebox Touch, Denafrips Ares 11 DAC, DCB1 Pre-amplifier, Croft Series 7 power amp.
    Custom Hifi cables HA10SE headphone amplifier and Hifiman HE-400 headphones.
    AV system: LG 55B7, Denon AVR -x2300w receiver, Quad 12L (front) 11c Centre and 11L rear . Velodyne DD15 subwoofer.

  8. #28
    Join Date: Oct 2008

    Location: Southampton, UK and Nicosia, Cyprus

    Posts: 1,139

    Default

    And what about these modders?

    http://www.audiocom-uk.com/

    I hesitate to buy a Transporter because I am enjoying my stock SB3 and Beresford 7510 6:4 so much, and because the market for streamers is still relatively immature. Who knows what is round the corner (who knows in any market)?

    I may, of course be up against the limits of my upgraded Quad 405-2 and my 20 year old MB Quart loudspeakers, even if they were in the same price bracket as the Quad Electrostatics when I bought them.

    In the longer term I may be in for a Transporter (or something of that class) and a pair of active speakers, or else some active speakers with internal DACs.

    But the speaker manufacturers are not rushing to the future!

    (Edit: Covenant, you beat me to the question by six minutes!)
    Last edited by Labarum; 08-03-2009 at 11:59.
    Brian

    In Southampton: Raspberry Pi 4 running PiCorePlayer, Beresford Caiman SEG, Quad 77 Int Amp and CD Player, AVI Neutron 4, Sennheiser HD25 headphones.
    In Nicosia: Small Format HTPC, Beresford 7520 ,Quad 405-2, Quart 980s German Tower Loudspeakers.

  9. #29
    leo's Avatar
    leo is offline Circuit Junkie & DIY Room Forum Leader
    Join Date: Jan 2008

    Location: Notts UK

    Posts: 1,804

    Default

    Quote Originally Posted by Covenant View Post
    Leo are you aware of anyone (individual or company) that offers SB3 upgrades in the UK? The only one I have come across is Audiocom.

    I'll have a look but don't think theres much choice over here

    Not knowing what mods these places do make it hard to recommend any of them, obviously the improvements will vary depending whats been done internally.
    Maybe Audiocom should provide an evaluation for a modded SB so you can see if you feel the improvements are worth it it makes it easier to compare against your own stock unit

    I'm actually amazed at the small choice of streaming devices , its time they did ones with 24/192 capable outputs
    Last edited by leo; 08-03-2009 at 12:22.

  10. #30
    Join Date: Oct 2008

    Location: Southampton, UK and Nicosia, Cyprus

    Posts: 1,139

    Default

    Quote Originally Posted by leo View Post
    I'm actually amazed at the small choice of streaming devices , its time they did ones with 24/192 capable outputs
    One of the reasons why I am not spending lots on the project at the moment.

    And what's Linn up to?

    https://www.ripcaster.co.uk/node/399

    £1000 with 20w power amps. Why? At that price I would want more than 20w to drive suitable speakers. Or is this their "Squeezebox Boom" for bedroom or kitchen use?

    On the up side I note that the box has been hacked to work with Slimserver because the supplied software is - awful. And some say it sounds better than the transporter.

    We have a way to go, and I hope open software will prevail so we can mix hardware.

    I wonder if AVI will pitch in.
    Brian

    In Southampton: Raspberry Pi 4 running PiCorePlayer, Beresford Caiman SEG, Quad 77 Int Amp and CD Player, AVI Neutron 4, Sennheiser HD25 headphones.
    In Nicosia: Small Format HTPC, Beresford 7520 ,Quad 405-2, Quart 980s German Tower Loudspeakers.

+ Reply to Thread
Page 3 of 4 FirstFirst 1234 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •