Hi Steve,
I'm currently using a Rega RB 1000 with a Koetsu Rosewood Signature, The weight is racked too far to the back and also, I feel an asymetrical weight would be better. Do you think you could make one in copper/tungsten alloy?
Cheers
Paul S
Trade: The Right One
Location: Far Away
Posts: 1,373
I'm Gone.
Hi Steve,
I'm currently using a Rega RB 1000 with a Koetsu Rosewood Signature, The weight is racked too far to the back and also, I feel an asymetrical weight would be better. Do you think you could make one in copper/tungsten alloy?
Cheers
Paul S
Trade: Magna Audio
Location: The New Forest
Posts: 1,915
I'm Steve.
Ongoing
Originally Posted by PaulStewart
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Tungsten must be a bitch to work with
Trade: Magna Audio
Location: The New Forest
Posts: 1,915
I'm Steve.
It would be. I insist on it being a Tungsten-copper alloy.
Tungsten must be a bitch to work with
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
New Member
Location: Norway
Posts: 3
I'm Paal.
Hi!
I'm another one of those who own a Technics 1200 and has the 18g AT-LH18 headshell with a Denon 103r. I have the Kab fluid arm damper like one of the other guys who asked (dpnt know if that affects this?). Could you make a counterweight for me? They look great and would be the perfect solution for me! I wasnt able to send you a pm here, since I just registered (found this through google).
Pål-Hallstein from Oslo, Norway
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 111,029
I'm AudioAl'sArbiterForPISHANTO.
Hi Paal,
Welcome to AoS
Before you go any further, could you please pop into the Welcome area and introduce yourself to our community, as you were asked to do in the registration email you received - ta!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
New Member
Location: Norway
Posts: 3
I'm Paal.
doneHi Paal,
Welcome to AoS
Before you go any further, could you please pop into the Welcome area and introduce yourself to our community, as you were asked to do in the registration email you received - ta!
Marco.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 111,029
I'm AudioAl'sArbiterForPISHANTO.
Thanks, Paal - much appreciate it
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Hampshire
Posts: 147
I'm Gren.
Request for custom counterweight
PM sent to speedy steve
System Sources: Audiolab 8000CDT, Sonos, SL1210 Mk2 the journey, so far isonoe feet and sumiko headshell, Jelco SA750D. Mike New bearing,bonded baseplate and copper armboard, now installed. Paul Hynes PSUSR7EHD-21/27, Trichord Research Dino Mk2 with NC power supply, Beresford Caiman SEG DAC .
Pre-amp: Teddy Pardo PR1
Power Teddy Pardo 2xMB100's
Other: Shahinian Obelisks
Trade: Magna Audio
Location: The New Forest
Posts: 1,915
I'm Steve.
Here you goPM sent to speedy steve
120g CW for Techi
Last edited by Magna Audio; 31-10-2017 at 12:16.
System: Turntable : SP10 MKII slate plinth, Custom Ebony tonearm board, Arm : Fidelity Research FR64s, Cartridge : SPU Royal N. SUT : Lundahl 1:13. Phonostage : Icon Audio, Streaming RPi/Kali reclocker -> I2S -> DSP XO / Pre / 4 DAC's : WAF Najda, 5 Poweramps : 3 x EL84 SET's, 2 x D class amps on bass channels, Speakers : 5 way front loaded horn system: 2 X Tapped sub 15" LF drivers / 2 X Exponential mid bass 15" drivers / Tractrix 200Hz mid horns with JBL2482's, / Tractrix 550Hz upper wooden horns with factory refurb'd Vitavox S2's / Raal Lazy Ribbons as high frequency tweeters. Wires: good silver or good copper where best suited. DIY RCM.
Maker of tonearm boards, armpods, Tannoy GRF style speaker cabinets, horn speakers, counterweights and more.
For more information about my creations and products please click below
http://fosworld.wixsite.com/magna-audio & on Instagram https://www.instagram.com/magna_audio/
Posting Permissions
Reply With Quote
