Drum roll, cymbal crash,,,Originally Posted by Roy S
Drunken Administrator
Location: Staffordshire, England
Posts: 43,349
I'm Martin.
Drum roll, cymbal crash,,,
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
SPEAKER PLACEMENT: These speakers will be at their absolute best placed 12 inches in from the side wall of a skip, preferably under an old rusty cooker...
Senior Member
Location: Romford
Posts: 11,998
I'm sorted.
I'm here all week...
Senior Member
Location: NW London
Posts: 267
I'm paul.
SPEAKER PLACEMENT: These speakers will be at their absolute best placed 12 inches in from the side wall of a skip, preferably under an old rusty cooker...
Bass Plonker
SPEAKER CABLES: Here at Charles Fraudio the art of design is unique. Many other manufacturers of boxes that produce noise allow the consumer to choose which cables can be attach to their speaker boxes. We found it almost impossible to train them to do so, therefore to improve the interface between cable and speaker thus enhancing noise quality, and frankly in an attempt to stop them making a beeline for the door as soon as they clapped eyes on our stunning speakers, we have super glued them to the speaker terminals so they can't get away...
AV Room Forum Leader
Location: Chorley, Lancs
Posts: 2,747
I'm Mike.
here's my little question to Charlie Fraudio, couldn't help myself tehehe
"those look really great can you tell me what crossover capacitors you are using, the cabinet material and finally the make of the drivers, you've already said about the bass drives but what about those superb looking midrange tweeters?"
As the late Colonel Sanders once said
"I'm too drunk to taste this chicken!!"
Senior Member
Location: Kent
Posts: 1,357
I'm Clark.
possibly a bargain in the making for the arm and cart but the hideous bit of wood underneath would have to go
http://www.ebay.co.uk/itm/LINN-SONDE...ht_3930wt_1398
Senior Member
Location: Northampton
Posts: 1,373
I'm Mark.
possibly a bargain in the making for the arm and cart but the hideous bit of wood underneath would have to go
http://www.ebay.co.uk/itm/LINN-SONDE...ht_3930wt_1398
Looks like he's had to compress on of the suspension springs a fair bit to counteract the weight of the arm. But, as you say, it's be better to dump the thing the arm is sat on.
Mark
Fount Master & Administrator
Location: Essex
Posts: 37,721
I'm openingabottleofwine.
An arm/cartridge combination I have wanted to try for the last thirty years!Possibly a bargain in the making for the arm and cart but the hideous bit of wood underneath would have to go
Barry
Senior Member
Location: Kent
Posts: 1,357
I'm Clark.
Go for it Barry.
The shipping will be reasonable without the junk it's sitting on.
Posting Permissions
