Vic does a 12mm version of the Reso-mat (for the Salvation, but it's available on request) - that might be worth a try here?Originally Posted by Marco
Moderator
Location: High Peak, Derbyshire
Posts: 2,241
I'm Keith.
Vic does a 12mm version of the Reso-mat (for the Salvation, but it's available on request) - that might be worth a try here?
Keith
Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
CDP: Inca Katana SE
DAC: Beresford Caiman MkII (LiPo Battery powered)
Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target
Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595
Gallery
I don't hear anything like that, Jerry, glad to say.
Banned
Location: Huddersfield
Posts: 3,358
I'm David.
Hi Martin,
I know you have said the platter is not coming off but I would welcome a comparison of my platter against it when it's ready, hopefully before Christmas? Would be interesting to see a plastic bake off as my platter is a form of plastic but obviously not acrylic!
Happy to try it out, David. At least the platter and Achromat can be removed as one as there is no access to lifting bolt holes required. Is there any chance you might be down south any time in the New Year? You might want to come hear the results for yourself.
Banned
Location: Huddersfield
Posts: 3,358
I'm David.
I have a couple of customers down your way who have ordered technics power supply's off me a while ago (the MK II version) so when I go down to fit them I may pop round to see you and I will bring you some decent power cords to try, the MK II ultimate which is even better than the one's Marco has
Hope that is OK?
Sounds like a plan!
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,778
I'm Andrew.
Martin,
did you keep your base plate in whilst experimenting with the FF platter ?
Andy
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
No - it's bolted and bonded in place. There will be no removing it ever
AV Room Forum Leader / Spaced Out
Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy
Posts: 11,165
I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.
That's a yes then
Bests, Mark
"We must believe in free will. We have no choice"Isaac Bashevis Singer
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,462
I'm AudioAl'sArbiterForPISHANTO.
Lol - what's the difference, a solid silver fuse inside instead or something?I have a couple of customers down your way who have ordered technics power supply's off me a while ago (the MK II version) so when I go down to fit them I may pop round to see you and I will bring you some decent power cords to try, the MK II ultimate which is even better than the one's Marco has
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Reply With Quote
