The Funk Firm Technics Platter

**John** · 10-12-2011, 09:25

Originally Posted by MartinT

I don't know that one, John. Do you have a link to more info?

http://theartofsound.net/forum/showthread.php?t=14600
What I suspect you hearing is a bit of bloom and think the Reso Matt might solve the issue but cannot grantee it just what you describing in the differences in the sound

**Marco** · 10-12-2011, 09:30

Only problem, John, is that VTA would be wrong in Martin's set-up, with the RESO-MAT, as to work best it needs to go straight onto the platter, and so if he puts it on top of his Achromat, in order to get the VTA right, it won't sound as good.

Unfortunately, with a Techy (because of its 'low' platter, no matter which one is used), you need a 5mm mat in order to get proper flexibility with adjusting VTA.

Marco.

**John** · 10-12-2011, 09:34

ahh shame did not think of that The matt raise VTA by 5mm

**The Grand Wazoo** · 10-12-2011, 10:32

Not that I'm exactly in the market for any of this stuff, but there's been no mention of cost yet - or did I miss it?

MartinT · 10-12-2011, 10:32

I wonder if you're interpreting my findings correctly, my deck is sounding very fast indeed and with slightly less brightness than before. I've also tried any number of mat/weight/clamp combinations and the Achromat bonded to the platter with the Bruil weight sounds best.

MartinT · 10-12-2011, 10:40

Originally Posted by The Grand Wazoo

Not that I'm exactly in the market for any of this stuff, but there's been no mention of cost yet - or did I miss it?

It's in the Funk site (linked) - £600.

MartinT · 10-12-2011, 10:50

Originally Posted by Marco

Looking good, Martin! One thing I think that can be agreed upon is that, aesthetically, the black Funk platter really suits the (black) SL-1210. I think that the clear one would look 'interesting' on an SL-1200.

I actually vacillated between clear and black but clear was out of stock, so black it was. Now that it's on my deck, I'm not disappointed at all - it looks superb.

I'm looking forward to your observations and am not surprised that yours may differ from mine. That's what makes listening to music so fascinating. I'm going back to listening, now

MartinT · 10-12-2011, 10:55

Originally Posted by WOStantonCS100

If I'm reading this review right, it still seems as if the difference between the MN platter and the FF platter are slight and may be negated by other things in the chain (mainly the cartridge / phono pre).

It's hard to be absolute about such subjective changes, Biff. For me, the Funk platter has given the overall sound a considerable lift - I know this because I went to bed very late last night after listening to record after record and enjoying the presentation so much. For you, it could be different. As I said in my O/P, the Mike New platter is no slouch. You're going to have to find a friendly dealer and try to borrow one to be sure.

**John** · 10-12-2011, 11:30

Martin what you describes in your improvement in sound sounded very similar to my experience when using a aluminum platter and adding the reso matt so thought if that was the case then it might be a cheaper alternative than a new platter but if you have no VTA adjustment left then there is no point so sorry for the sidetrack

**jandl100** · 10-12-2011, 13:18

When I have heard tt's with an acrylic platter they have had a distinctive sound/colouration that I attributed to the material.

A kind of slight hollow 'boing' reverberation overlaid on everything.
Indeed you can buy aftermarket rubber bands to go around acrylic platters to address this issue.

Has this been addressed in the design? ... or am I talking complete pish?!

Thread: The Funk Firm Technics Platter

Thread Tools

Display

Tags for this Thread

Posting Permissions