Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
I hear yee ...Originally Posted by kininigin
That's far too many carts for 1 person,tell you what i'll take the decca off you,to lighten the load
Where did you source the SC35C from?, surfing on the bay the other night with nothing in mind and notice one had just been listed, remember reading it on here so bought it, seller was from Stirling, 30 mins drive from me.
Frank...made me do it.
Senior Member
Location: Berkshire uk
Posts: 1,744
I'm Allthatwasisorwillbe.
nice one,i really like this cart and my vinyl listening and purchase's have increased significantly since getting it.
Let us know what you think of it,when you get the chance.
Darren
KORUS CUSTOM SERVER
TECHNICS 1200 MKII_JELCO 750D_SHURE SC35C (with NOS and NEO SAS styli)
CAIMAN SEG + DORADO PSU
CROFT MEGA MICRO
PARADIGM REFERENCE ACTIVE/40'S
PARADIGM SERVO 15 SUBWOOFER X 2
''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,458
I'm AudioAl'sArbiterForPISHANTO.
If you ever do sell that, Andy, give me first dibs! Can we see your Shure SC35C?
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
Why the fugg did Technics discontinue this? I know, vinyl was supposed to be dying back in the late 80's and nearly did. They could have hopefully kept the tooling and used the basic generator as a base for some new models of differing tip and tracking needs - DJ on the one hand and audiophile on the other. The suspensions if the mk3 onwards are supposed to be temperature tolerant and as long as it's survived the twenty years or so since I suspect it was made, it can easily be re-tipped later on
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Senior Member
Location: Devon
Posts: 1,903
I'm stu.
That cart is one sexy looking beast.
301/Puresound 2A3/quite large Grf cab horny ones.Eminence/Coral/Le cleach
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
I don't see me selling and believe or not, there was a PM within minutes of the 1st picture posted, not got the SC35C yet, sent a cheque so waiting for it to clear before i get it, will post a pic for your to verify once i get my mitts on it.If you ever do sell that, Andy, give me first dibs! Can we see your Shure SC35C?
Marco.
Seemingly A.J Van Den Hul said this is the only MM cart worth his effort re-tipping, that Chemical Vapour Deposition shank was state of the art at the time,pretty toxic process, the profile of that polished diamond is amazing under a high power scope, when i got it my reaction was ''where's the tip?'' until i caught the glint.Why the fugg did Technics discontinue this? I know, vinyl was supposed to be dying back in the late 80's and nearly did. They could have hopefully kept the tooling and used the basic generator as a base for some new models of differing tip and tracking needs - DJ on the one hand and audiophile on the other. The suspensions if the mk3 onwards are supposed to be temperature tolerant and as long as it's survived the twenty years or so since I suspect it was made, it can easily be re-tipped later on
Frank...made me do it.
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Thanks Stu, sexy enough to have Smurf Sex with ????.
.
.
.
.
.
.
.
...shag it till your blue in the face.
Frank...made me do it.
Senior Member
Location: Glasgow
Posts: 1,225
I'm andy.
Hooray...got my SC35c today.
By wiiandy at 2011-09-30
By wiiandy at 2011-09-30
By wiiandy at 2011-09-30
By wiiandy at 2011-09-30
made in USA on the back and top of cartridge body,it even includes a sealed little bag of fitting kit comprising 2 x mounting screw set,2 x spacers, set of 4 tags to connect to pins in case of damage to original, very please.
wii.
Frank...made me do it.
Senior Member
Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...
Posts: 14,540
I'm David.
Not as sexy as the technics 205 is it
Still, enjoy the Shure, I know you will, very much I suspect
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Posting Permissions
Reply With Quote
