Ah good if i get 5 mins this week i will pop into my local Maplins and grap one to try out
Ah good if i get 5 mins this week i will pop into my local Maplins and grap one to try out
Jon
A person who never made a mistake never tried anything new.
Set up
Lafayette el84 power amp , Audio note M1 pre , Tannoy Sterlings, Garrard 301 , SME 3012 , puresound P10, Ortofon SPU, Cambridge CXN streamer
Micro mega Duo 3 cd transport ,
Here you go the teddy PS is the one on the right the other transformer on the left is for another power supply that I got built by some else to power the upgraded clock in my SB3. Some of the caps on the TPS have been upgraded to better ones which includes the bigger cap.
Kirk.
You've gone rather quiet about this item since my last post.
Here's the most recent post I've spotted about Welborne http://forums.slimdevices.com/showthread.php?t=86415
I also happen to know someone who has been at the receiving end of Welborne's "customer service".
Chris
Common sense isn't anymore!
Location: N. Ireland
Posts: 89
I read your reply to me in Post #31 which read:
I am certainly not going to search around the DIY forum to find out what you mean't, if you can't answer a post in a non-cryptic manner, why bother answering!It's not the present, it's the Greek.
If you do a search on DIY Audio you'll see what I mean.
The post you link to on the SqueezeBox forum is a thread about one person's experience with their customer service, not with the actual PSU itself...
You and Will (WAD62) just seem to enjoy rubbishing products you haven't any experience with.
Alister
Logitech Touch->Mark Grant 1000HD Digital Coax->Audio-GD DAC-19MK3->Mark Grant 2000HD Phono->Roksan Kandy K2 (int amp)->Van Damme Studio Grade Blue Speaker Cable 2 x 4mm->PMC DB1S+
I don't recall rubbishing any product...only the price
Have you had any experience with the maplins PSU?
If yes then I bow to you sir
If No? then you're hardly in a position to make an objective judgement on their respective values and capabilities, and we're entering the world of hypocrisy...
Cheers, Will
Location: N. Ireland
Posts: 89
Yes, on reflection, it was only the price you rubbished, so apologies there:
However, this comment on the price is rather unnecessary!We've all spent a lot of money on our systems here, it's just a question of what that money gets you, and for the £200 you've spent on a linear PSU for your touch, I've got 3 for my SB players, 2 more for my T-Amps, and have change left over for a Beresford DAC...Oh and a trip round t' world on't QE2
I have absolutely no experience with Maplin's PSU and neither have I criticized it in any way, or offered any opinions on it at all, the only comment I offered was when you wrote:
I replied:I've just ordered one for my SB3, 5V,
So not having passed judgement on its performance or price these comments:I will be interested to see what results this gives.
Are completely wasted on me...especially the bit about hypocrisy!then you're hardly in a position to make an objective judgement on their respective values and capabilities, and we're entering the world of hypocrisy![]()
Alister
Logitech Touch->Mark Grant 1000HD Digital Coax->Audio-GD DAC-19MK3->Mark Grant 2000HD Phono->Roksan Kandy K2 (int amp)->Van Damme Studio Grade Blue Speaker Cable 2 x 4mm->PMC DB1S+
Chris
Common sense isn't anymore!
Given that my criticism was based solely on price, how on earth can a comment about it's price be deemed unnecessary, I would have thought the word to use might be 'relevant', or even 'necessary' if you prefer.
I'm not quite sure which bit of the comment caused a problem for you...
Cheers, Will
Reviving this thread to ask about another Maplins PSU as a potential replacement for the 5V 3amp one supplied with the Touch.
http://www.maplin.co.uk/ac-dc-multi-...r-supply-48517
Can set it to run 5V DC at 5 amps and its a regulated supply, so should mean voltage pretty stable and is as stated?
Just curious to try it, as its sitting in a box doing nothing. It will also let me use my foo mains lead with my Touch, which may or may not make a difference
(Actually, the mains lead made an good improvement with my old amp, so suspect it wouldn't do any harm)
The Touch runs 5V and the supplied PSU is rated at 3 amps I think.
I'm assuming the Touch would only draw what it needs amp wise...no problem with the Maplins supply being 5amps?
Just curious if it will physically work and not blow up my Touch!
The numbers seem ok?
Just curious to try it, not expecting much.
Last edited by Gazjam; 18-04-2011 at 15:34.
Ok with not having it on Betamax nowadays
Hi Gaz I'm using one of those on an SB3 quite successfully, at 5V, and no smoke has eminated from it yet
However this linear one is even better IMHO, if it ever filters through to the shops...
http://www.maplin.co.uk/ac-dc-multi-...r-supply-32754
...I've got 3 of it's predecessor, which didn't do 5V (the closest was 4.5), but does the 9V requires for my SB receivers, and 12V for my TC-7510.
Check with the shop first as there seem to be a lot of the older spec out there in the stores, with the same model number![]()
Cheers, Will