+ Reply to Thread
Page 5 of 6 FirstFirst ... 3456 LastLast
Results 41 to 50 of 54

Thread: New product priced far too low to gain credibility?

  1. #41
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,543
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Nice one, Jerry! Always nice to hear of this type of gear, as it fulfils the AoS ethos of maximum SPPV!

    I don't see the 12 remaining lasting for too much longer

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  2. #42
    Join Date: Jul 2010

    Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy

    Posts: 11,165
    I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.

    Default

    Quote Originally Posted by Marco View Post
    SPPV!
    Wassat? Special Police Pursuit Vehicle?



    I think i have sussed it... sound per pound value
    Last edited by Reid Malenfant; 13-10-2010 at 17:49. Reason: Realised what it might be...lol
    Bests, Mark



    "We must believe in free will. We have no choice" Isaac Bashevis Singer

  3. #43
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,543
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Correctomondo!

    We loikes that sort of stuff

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  4. #44
    Join Date: Dec 2008

    Location: Yorks

    Posts: 16,643
    I'm Nobody.

    Default

    You get nothing for your money these days but crap imho. I'd rather buy something old & well built second hand & put up with what people call 'Long In The Tooth'.. Makes me feel good saves me loads of dosh & lasts twice as long.

  5. #45
    Join Date: Jul 2010

    Location: North Cambs UK, Earth, Sol, Orion - Cygnus arm of galaxy

    Posts: 11,165
    I'm MadeOfDeadGiantStarsThatExplodedEonsAgo.

    Default

    Quote Originally Posted by Andre View Post
    You get nothing for your money these days but crap imho. I'd rather buy something old & well built second hand & put up with what people call 'Long In The Tooth'.. Makes me feel good saves me loads of dosh & lasts twice as long.
    If not longer Yep, i'm with you Andre. Things definately are no way built like they used to be & it doesn't matter what it is you are talking about. I have an old Electrolux cylinder vacuum cleaner that my parents bought before i was born & it still works fine & has never needed the brushes changing. It gets used by me quite a bit when woodworking etc. Must be near on 50 years old

    I know people that have gone through 3 or 4 Dysons How old are they....

    It's the same with audio equipment, the older stuff was better built. There is just no two ways about it
    Bests, Mark



    "We must believe in free will. We have no choice" Isaac Bashevis Singer

  6. #46
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,540
    I'm David.

    Default

    Quote Originally Posted by Alex_UK View Post
    I did wonder if it was you running a secret cottage industry and it would only be a matter of time before you tapped me up for one!
    It's been suggested that I should set myself up as a Turntable Guru, but it would be a long way for people to travel. Our very local Naim dealer has a huge majority of clients well away from here and outside the county... Whether they travel or mail order I don't know.
    I can't go on and I can't go back, I don't feel so matter of fact,
    I tried and tried to make good sense, What's the good to try it all again?

  7. #47
    Join Date: Apr 2009

    Location: Near Saffron Walden, Essex

    Posts: 7,358
    I'm Dave.

    Default

    Quite right.

    You should take in turntables for setting up, service and repairs. No one knows more than you about the subject and you would do the job far better and cheaper than most of the professional 'experts' out there.

    I say - go for it and do everyone a favour....

  8. #48
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,543
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    What's to 'set-up' or 'service' on a Techie?

    Folk will faff around with bloody belts and bouncy suspensions!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  9. #49
    Join Date: Jan 2009

    Location: Essex

    Posts: 37,765
    I'm openingabottleofwine.

    Default

    Quote Originally Posted by Reid Malenfant View Post
    If not longer Yep, i'm with you Andre. Things definately are no way built like they used to be & it doesn't matter what it is you are talking about. I have an old Electrolux cylinder vacuum cleaner that my parents bought before i was born & it still works fine & has never needed the brushes changing. It gets used by me quite a bit when woodworking etc. Must be near on 50 years old

    I know people that have gone through 3 or 4 Dysons How old are they....

    It's the same with audio equipment, the older stuff was better built. There is just no two ways about it
    Dysons are expensive foreign built rubbish - I don't why people think so highly of them.
    Barry

  10. #50
    Join Date: Jan 2008

    Location: gone

    Posts: 11,510
    I'm gone.

    Default

    Quote Originally Posted by Barry View Post
    Dysons are expensive foreign built rubbish - I don't why people think so highly of them.
    The power of a big advertising budget ... same as Bose, innit.
    .

+ Reply to Thread
Page 5 of 6 FirstFirst ... 3456 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •