+ Reply to Thread
Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 73

Thread: Croft Mega Micro with seperate PSU

  1. #51
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,814
    I'm Andrew.

    Default

    Quote Originally Posted by Marco View Post
    ECC83s can sound thin compared with 6SL7s, where the midrange excels. I'm sure your speakers will easily show this. Good octal valves are reasonably easy to source, but you have to know what you're looking for. A good rule of thumb is the older the better, so 1940s military spec are the holy grail, something like these: https://www.ebay.co.uk/itm/840021673...Bk9SR4q_-Li-aA or these: https://www.ebay.co.uk/itm/287611123...90.c101224.m-1

    Not cheap (you will need 5 of them), but if you want something that lasts, and I mean for many 100s of hours, you get what you pay for. Have a Google around and see what you can find, based on these parameters [6SL7 NOS or NIB, matched pairs, fully tested]. Send me some links to what you've found and I'll give you my opinion.

    Have you approached Alan about the conversion yet just to get a ballpark cost?

    Marco.
    6SL7 valves are great, I have about 15 pairs sitting at home, however you can do better with RCA 5691 (just my opinion of course).
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE / MONO
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker





  2. #52
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Quote Originally Posted by Wakefield Turntables View Post
    Here's my adventure with my Croft Epoch which I still use. It's had even more work done on it since I last updated the thread. Enjoy.

    https://theartofsound.net/forum/show...+epoch+pre+amp
    I'll read that thread with interest! Thanks for posting.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  3. #53
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Quote Originally Posted by Wakefield Turntables View Post
    6SL7 valves are great, I have about 15 pairs sitting at home, however you can do better with RCA 5691 (just my opinion of course).
    Do you want to reduce that number to 10? Only joking. What do you find better about the RCA,s?
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  4. #54
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by kininigin View Post
    Just checked your links, definitely more expensive than any valve I've bought thus far lol. Especially if 5 are needed. So would I need quad match pairs? Or just a pair? I will scour the web and see what I come up with per your parameters.

    Not got that far with Alan yet
    You rarely see matched quads, so two matched pairs (one each for the phono and line stages), and a single, is the way to go

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  5. #55
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Wakefield Turntables View Post
    6SL7 valves are great, I have about 15 pairs sitting at home, however you can do better with RCA 5691 (just my opinion of course).
    Hi Andy,

    Yeah, 5691s are great and seemingly last forever, but they're a 50s tube, and I prefer military spec 1940s. It's all very system dependant, though. Ultimately, the 5691 is just a 'pimped up' derivative of a 6SL7.

    Did you get to try any black glass 6SU7GTYs (the pair in the second link I gave Darren) during your tube rolling journey?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  6. #56
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Quote Originally Posted by Marco View Post
    You rarely see matched quads, so two matched pairs (one each for the phono and line stages), and a single, is the way to go

    Marco.
    I see, understood. As you say, need to speak with Alan and see what he thinks can be done and start getting some figures so I know what I'm playing with.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  7. #57
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Defo

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #58
    Join Date: Jun 2015

    Location: London/Durham

    Posts: 7,537
    I'm Lawrence.

    Default

    Quote Originally Posted by Marco View Post

    Did you get to try any black glass 6SU7GTYs (the pair in the second link I gave Darren) during your tube rolling journey?

    Marco.
    I've not heard of them so initially thought it was a typo. Is there an equivalent for the 6SN7GT?

  9. #59
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    The Osram B65, but the prices are eye-watering: https://www.ebay.co.uk/itm/960183101...JZI7Jt4p_ooc-o

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #60
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,814
    I'm Andrew.

    Default

    Quote Originally Posted by Marco View Post
    Hi Andy,

    Yeah, 5691s are great and seemingly last forever, but they're a 50s tube, and I prefer military spec 1940s. It's all very system dependant, though. Ultimately, the 5691 is just a 'pimped up' derivative of a 6SL7.

    Did you get to try any black glass 6SU7GTYs (the pair in the second link I gave Darren) during your tube rolling journey?

    Marco.
    Nope! My Croft is now modified to accept 2 5691's only. I got rid of the three that were in the phonostage. I didn't rate the Croft implementation of phonostage despite experimenting with 12 different types of 6SL7 variants. That's not to say that I wouldn't want to try them, I'd have to make 100% sure they would do no harm to the Croft.

    Quote Originally Posted by kininigin View Post
    . What do you find better about the RCA,s?
    Nothing! I went all in and had my Croft modded especially to take full benefits of the 5691.


    Quote Originally Posted by Marco View Post
    The Osram B65, but the prices are eye-watering: https://www.ebay.co.uk/itm/960183101...JZI7Jt4p_ooc-o

    Marco.
    What's so special about these? Have you tried or heard them??
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE / MONO
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker





+ Reply to Thread
Page 6 of 8 FirstFirst ... 45678 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •