+ Reply to Thread
Page 5 of 8 FirstFirst ... 34567 ... LastLast
Results 41 to 50 of 73

Thread: Croft Mega Micro with seperate PSU

  1. #41
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Hello all, been awhile since i last posted on here. So been no changes to my system, till i fairly recently bought a Decca 4RC, which has been eye opening. Fantastic cart and has shown me what my system is capable of.

    This leads to the Mega Micro and getting this upgraded. I have contacted Alan (FireBottle) for his opinion and await his response. In the mean time, what if anything should i get done? I want to keep the design philosophy of Glenn Croft and not change too much. So thinking just replace parts to something better? I'm certainly thinking potentiometers.

    What would you do in my position? Go all out, or upgrade sparingly? All opinions welcome
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  2. #42
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Darren,

    Long time no see... Howz it hangin?

    I can help you with this as I've heavily modified my own Croft from a standard unit, and so know what each step does in terms of upgrading components. Before we go any further, does your amp have the small ECC83 type of valves or the larger octal ones, such as 6SL7s?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  3. #43
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Quote Originally Posted by Marco View Post
    Hi Darren,

    Long time no see... Howz it hangin?

    I can help you with this as I've heavily modified my own Croft from a standard unit, and so know what each step does in terms of upgrading components. Before we go any further, does your amp have the small ECC83 type of valves or the larger octal ones, such as 6SL7s?

    Marco.
    Hi Marco,

    Yes been awhile hasn't it. Good to see you back and hope you are well. I'm good enjoying the early retirement life The Mega uses ECC83 and EEC99 valves, not sure about the valves in the psu. I would have to check. I feel a bit torn about upgrading after the passing of Glenn but I'm simply never going to get what I've got in any current production valve pre at sensible prices that can better The Mega Micro. So i want to explore what can be done. I basically want the last pre amp I'll ever need.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  4. #44
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    I'm well now, thanks, and like you enjoying the early retirement life

    Sounds like you're serious in getting the best out of the amp, so my advice will bear that in mind. Given you've told me that the amp uses ECC types, to do the job right I'd advice you get it converted to octal (NOS) valves, namely 6SL7s, as this will elevate the performance of your amp to another level and give you the infrastructure to take things further with things such as conversion to MOSFET regulation (which I'd have done at the sea time as the conversion to 6SL7s), stepped attenuators and upgraded PSU caps.

    I'd leave the valves in the PSU alone, although they may need changed as part of the conversion. I think Alan's done this thing before to Croft amps, so there shouldn't be an issue.

    If you have any questions to ask, just fire away!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  5. #45
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Quote Originally Posted by Marco View Post
    I'm well now, thanks, and like you enjoying the early retirement life

    Sounds like you're serious in getting the best out of the amp, so my advice will bear that in mind. Given you've told me that the amp uses ECC types, to do the job right I'd advice you get it converted to octal (NOS) valves, namely 6SL7s, as this will elevate the performance of your amp to another level and give you the infrastructure to take things further with things such as conversion to MOSFET regulation (which I'd have done at the sea time as the conversion to 6SL7s), stepped attenuators and upgraded PSU caps.

    I'd leave the valves in the PSU alone, although they may need changed as part of the conversion. I think Alan's done this thing before to Croft amps, so there shouldn't be an issue.

    If you have any questions to ask, just fire away!

    Marco.
    Thanks for the suggestions. So what is it about octal valves that would take it up a level? I don't know anything about them. I'm guessing Mosfet regulation brings tighter tolerances over valve regulation? How does that translate as a listening experience? In regards to stepped attenuators, any recommendations? I seem to remember years ago of Dact being discussed in relation to Croft amps. Not sure of other brands that have been used.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  6. #46
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Compared with ECC83s, octal valves offer more weight and refinement to the presentation of the music and a generally 'bigger', more rounded, sound. It's like comparing a KT88 with a 300b, or in the wine world, a young fruity Chianti with an aged Barolo

    Trust me, if you carry out the conversion your own ears will tell you what the difference is, and you'll have a big smile on your face when you hear the improvement - *but* you must use NOS (or NIB) valves, matched pairs, which have been fully tested on a valve tester, meeting all necessary parameters. Modern production 6SL7s are crap in comparison, and not reliable.

    Glenn used to make his preamps with 6SL7s, as he knew they were better, but changed to ECC83s after finding modern production 6SL7s unreliable. The circuit is also simpler with ECC83s and more cost effective, hence why the switch was made. If he was around now, he'd have gladly done the conversion for you, as he's done it for people many times before.

    Mosfet regulation is simply more accurate, and again this is a tweak Glenn recommended, giving a tighter and more extended bass. It was one of the first things I did with my own Croft and I haven't looked back.

    In terms of stepped attenuators, DACT are very good, and indeed that's what's in mine. However, Khozmo are also very good and make some high quality attenuators. See here: https://khozmo.com

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  7. #47
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    More weight and refinement sounds like what I'm looking for. Especially in the midband, where at the moment it is slightly on the thinner side of things and more refinement is always welcome. I believe my speakers will be able to show this. So far they have easily shown any improvements I've made. Are NOS Octal valves easy to source? I'm not looking to get the Mega sent off till after Xmas, so have a bit of time to look into it.

    Good to know Glenn did these conversions for people as i don't want to stray from his designs. The Mosfet regulation sounds like a no brainer, so happy to go with that.
    The Khozmo stepped attenuators look like very well made quality products and i suspect far better than what i have at the moment.

    Thank you for your input. Quite excited to get this little project started. The Mega sounds fantastic to me as it is, so if it can be improved even more, I'll be a very happy chappy.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  8. #48
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 111,207
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    ECC83s can sound thin compared with 6SL7s, where the midrange excels. I'm sure your speakers will easily show this. Good octal valves are reasonably easy to source, but you have to know what you're looking for. A good rule of thumb is the older the better, so 1940s military spec are the holy grail, something like these: https://www.ebay.co.uk/itm/840021673...Bk9SR4q_-Li-aA or these: https://www.ebay.co.uk/itm/287611123...90.c101224.m-1

    Not cheap (you will need 5 of them), but if you want something that lasts, and I mean for many 100s of hours, you get what you pay for. Have a Google around and see what you can find, based on these parameters [6SL7 NOS or NIB, matched pairs, fully tested]. Send me some links to what you've found and I'll give you my opinion.

    Have you approached Alan about the conversion yet just to get a ballpark cost?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  9. #49
    Join Date: Jun 2009

    Location: Berkshire uk

    Posts: 1,758
    I'm Allthatwasisorwillbe.

    Default

    Just checked your links, definitely more expensive than any valve I've bought thus far lol. Especially if 5 are needed. So would I need quad match pairs? Or just a pair? I will scour the web and see what I come up with per your parameters.

    Not got that far with Alan yet, will try to get some pics to him so he can see what he is dealing with.
    Last edited by kininigin; 19-11-2026 at 20:15.
    Darren

    KORUS CUSTOM SERVER
    TECHNICS 1200 MKII_JELCO 750D_DECCA FFSS 4RC_SHURE SC35C (with NOS and NEO SAS styli)
    CAIMAN SEG + DORADO PSU_S.M.S.L. SU-1
    CROFT MEGA MICRO
    PARADIGM REFERENCE ACTIVE/40'S
    PARADIGM SERVO 15 SUBWOOFER X 2


    ''The theory of relativity is a mass of error and deceptive ideas violently opposed to the teachings of great men of science of the past and even to common sense''

  10. #50
    Join Date: Nov 2010

    Location: Yorkshire

    Posts: 9,814
    I'm Andrew.

    Default

    Here's my adventure with my Croft Epoch which I still use. It's had even more work done on it since I last updated the thread. Enjoy.

    https://theartofsound.net/forum/show...+epoch+pre+amp
    SS
    CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10

    VALVE / MONO
    PRE
    Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker





+ Reply to Thread
Page 5 of 8 FirstFirst ... 34567 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •