New Member
Location: County Down
Posts: 19
I'm Mark.
Dilemma. Tonearm rewire or upgrade?
My tonearm needs a rewire.
There’s a break in one of the cables somewhere.
It’s a Rega RB250 fitted to a Pink Triangle LPT.
For the price of a rewire I could gamble on another arm 2nd hand from eBay.
Anyone have any advice or strong opinions?
I do sort of like the idea of repair rather than replace but you know…. New shiney stuff!
Trade: Radlett Audio
Location: Near Saffron Walden, Essex
Posts: 7,357
I'm Dave.
Return to Rega for a proper rewire which is most likely less expensive than a rewire from another company/person and done properly, which requires a rebuild.
You might buy an arm from e-Bay and have other problems. At least this way you can be assured it is 100%.
New Member
Location: County Down
Posts: 19
I'm Mark.
That didn’t even cross my mind as an option.
Thanks!
Senior Member
Location: Birmingham
Posts: 7,295
I'm James.
I think that is what I would do, you never know it maybe a slight upgrade too?Originally Posted by hifi_dave
Trade: Radlett Audio
Location: Near Saffron Walden, Essex
Posts: 7,357
I'm Dave.
Yes, they have upgraded the wiring over the years.
When Rega do a rewire, they dismantle the arm to make sure the internal wiring is laying correctly and then they rebuild using the appropriate jig. You can't do that by pulling the wire through as third parties do.
Senior Member
Location: Glasgowshire
Posts: 10,638
I'm Gary.
Strong Opinion from a current Rega turntable user.
Get your arm repaired and fettled.
AudioOrigami rewire.
Will be an upgrade over stock Rega wiring.
From memory he uses Van Damme mic cable and Neutrik connectors, may have changed mines was many years ago.
I know Jon(J7) outside of forumland, and he's forgotten more about tonearms than most engineers know.
Back in the day when i ran a Gyrodec, I got him to rewire my Michell Technoarm (an upgraded Rega arm) and it got scarily close to my SME V that replaced it.
SME was better, yup, but "diminishing returns" better.
The Rega arm is worth saving.
Ok with not having it on Betamax nowadays
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,778
I'm Andrew.
Or just upgrade to a SME V.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Senior Member
Location: Glasgowshire
Posts: 10,638
I'm Gary.
Oooft!
Ok with not having it on Betamax nowadays
Don McCorleone
Location: Galashiels
Posts: 14,026
I'm inthescottishmafia.
Yep, he rewired my 774 with Ikemi silver wire. Not the cheapest but was well worth doing.
“Music has always been a matter of energy to me, a question of fuel. Sentimental people call it inspiration, but what they really mean is fuel. I have always needed fuel. I am a serious consumer. On some nights I still believe that a car with the gas needle on empty can run about fifty more miles if you have the right music very loud on the radio”
Hunter S Thompson
Reply With Quote
