Absolutely fascinating, Paul!
How would you fancy a couple of visitors sometime? We love the highlands and Islands and always wanted to go back up that way some day
Marco.
Absolutely fascinating, Paul!
How would you fancy a couple of visitors sometime? We love the highlands and Islands and always wanted to go back up that way some day
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Location: Scotland
Posts: 316
I'm Paul.
Hi Marco,
Unfortunately we do not have spare room for visitors at present.
We are part way through a house renovation, and the loft/garage conversions, for additional bedrooms and dedicated music room, have not started yet. It will be several years before we get to this, as we will have to accumulate the funds that will be required before going ahead. At the moment all the ground floor accommodation is in use. This is somewhat inconvenient because when family and friends visit we have to find accommodation for them elsewhere. This can be a problem at certain times of the year, as there are so few hotels and B&B establishments on the island.
Regards,
Paul
Paul Hynes Design
paulhynesdesign.com
High Performance Power Supply upgrades
http://theartofsound.net/forum/showthread.php?t=16655
Hi Paul,
Lol - I didn't mean actually staying with you; just coming to visit
I presume there is at least one hotel or perhaps a few B&Bs in the area - oh and somewhere to hire a car would be good, too...
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Location: Scotland
Posts: 316
I'm Paul.
Hi Marco,
There are three hotels within a 10-15 minute drive and a number of B&Bs around but they are small and often fully booked in summer depending what is going on locally. Car hire is available but be careful where you book a car as my lass’s family were given one that would have been at home on the scrap heap. Most of the roads are single track so don’t expect to go anywhere quickly. All the islands from Eriskay in the South to Berneray in the North are connected by causeway and the others have ferry connections, so island hopping is relatively easy and well worth doing for the stunning scenery
Regards
Paul
Paul Hynes Design
paulhynesdesign.com
High Performance Power Supply upgrades
http://theartofsound.net/forum/showthread.php?t=16655
You might have problem getting a pint up there but i bet your mains supply is clean as a whistle
Location: Scotland
Posts: 316
I'm Paul.
Hi Colin,
Unfortunately the mains supply here is not that clean. We get the usual domestic interference from other homes and my computer UPS supply monitor shows wild variations in voltage on the mains supply. We get a lot of power cuts especially during the winter storms where gale force winds and lightening strikes can take the local grid out. We also suffer from repetitive trip-outs of protection equipment on the local grid, which is why I had to install the UPS on the computer.
Regards
Paul
Paul Hynes Design
paulhynesdesign.com
High Performance Power Supply upgrades
http://theartofsound.net/forum/showthread.php?t=16655
Oh. Sorry to hear that. I guess i was thinking of RF which i had a real problem with when i lived in Crystal Palace ( until recently)
I would love to have a go at your PSU for my technics Paul. I used to be a spark and i love having a fiddle with my soldering iron. It looks really straight forward but then i thought that about a mates video intercom i installed. I blew a cap and he had to get another one so im not as confident with electronics now. It does look easy though.
Its a doddle to wire up Colin, Paul couldn't have made this module any user friendly than this (well done that man) the hardest bit is drilling the holes in the case, wiring things up is easy too.
If you do fancy a bash you could just post on here if you need any advice or whatever![]()
Cheers,
Leo
Thats great Leo , i will get going at the end of the month.![]()