it's official spring is coming!

[Frankyc2003]

This is getting very exciting��
I have a couple of very dense granite slabs weighting around 15kgs each. Provided I increased the thickness of the springs, I could try mass loading easily.
Where would you recommend to buy the NoVibra from?

[Frankyc2003]

This a truly impressive setup you have here. I fear that in my case the speakers would end up with my downstairs neighbours ��

Yes, the bike pump. It is possible to level the support by pushing and pumping at the same time. Not in use at the moment, as the steel top cab supports mean the old set won't fit. Now the top cabs are supported from the steel box section from the back, using small springs on the bolts to provide some isolation (not properly evaluated yet) and running straight down to the solid floor (oak on concrete). I remade the old steel supports and oak veneered them to hide them somewhat.
[IMG][/IMG]
The bass cabs can be slid out without disturbing the top cabs, just disconnect the external crossover and pull! http://theartofsound.net/forum/showt...n-Jenzen-build

[AlfaGTV]

If you're near a Clas Ohlson-store they sell the exact same thing:
http://www.clasohlson.com/uk/Anti-Vi...n-Pads/30-9687

Regards /Mike

[Ronksley]

This is very interesting
Previously have messed about with putting weights on top of speakers and really feel it did tighten the sound up
Also spring based mounting which I wasnt so sure of
25kg on top of a speaker ! couldnt lift anywhere near that much and what it crushed the speaker

I have been thinking about getting some of these both to go on top of and under speakers

http://www.decathlon.co.uk/28mm-rubb..._1042311.html#

Also to use to build up my strength as recovering from being very ill but to weak to carry stuff like this home from the shop

[Frankyc2003]

If you're near a Clas Ohlson-store they sell the exact same thing:
http://www.clasohlson.com/uk/Anti-Vi...n-Pads/30-9687

Regards /Mike

Cheers. That's pretty cheap too!