Marco's cleaning process with new vinyl, using an RCM

Quoted from a email i recieved.

and that took about 15 hours to dry!


:scratch:

http://theartofsound.net/forum/attac...6&d=1401664312and that took about 15 hours to dry!

Hi Marco

What brushes do you use as there are so many options out there to choose from?

Thanks
Martin

Quote:

---

Originally Posted by Marco

Indeed, and of course it's important to remember that, because of that, the levels of static and dust experienced will vary depending upon the environment one inhabits :)

For reference, here's the process I use for cleaning new records (bearing in mind that I use a VPI RCM):

1) Ensure that one's hands, together with the platter mat of the VPI machine, are spotlessly clean before handling records, and also for placing the first record on the platter for cleaning. Fit the nozzle, used in the drying process, reserved specifically for cleaning new records, and prepare the VPI brush for use, also reserved solely for the same purpose. Ensure that both are spotlessly clean before beginning the cleaning process.

Yes, to avoid the contamination of new records, I have separate brushes and nozzles for cleaning both new and used vinyl! ;)

2) Switch on RCM, and whilst the platter is in motion, slowly 'drizzle' the cleaning solution (which I make up myself), in small amounts, onto the surface of the record, ensuring even coverage.

3) Switch off RCM, and in a circular motion, with the pristine clean brush, reserved solely for cleaning new records, gently 'work' the liquid into the record grooves, ensuring that the entire surface of the record is coated in the cleaning solution. Then allow it to penetrate into the grooves for about 10 seconds and loosen any dirt or mould release agent, located deep within the grooves, which may remain as a by-product of the vinyl manufacturing process.

4) Switch RCM back on, and whilst holding the brush vertically over the record surface, press it gently into the record grooves, as the platter is in motion, and keep it there for a two or three revolutions, allowing the brush to lift up any 'crud' that shouldn't be there, and allow it to accumulate underneath the bristles.

5) Lift the brush off of the record, and whilst the platter is still in motion, place the drying nozzle over the accumulated cleaning solution, containing the removed debris (invisible to the naked eye), switch on the vacuum cleaner and proceed to 'hoover up' all of the solution until the record is bone dry and sparkling clean. Leave the record on the platter just for a few seconds to allow it to 'air dry' before turning it over and repeating the whole cleaning process for 'Side B'.

6) Once done, [this is where the Zerostat gun comes in], there is usually a small build of static, as a result of the felt strips, fitted to the drying nozzle, passing over the record surface and making light contact with it, during the drying process. Therefore, simply 'zap' the record surface once with the Zerostat gun, thereby discharging it from any static, lift the record off of the platter and pop it into an anti-static record sleeve.

Job done! The record is now pristine clean, totally static-free, and ready for use. It will also stay that way for a very long time, unless mishandled :cool:

The same process is used for cleaning second-hand records (using the dedicated brush and nozzle for that purpose), although depending on how dirty the records are, this could affect steps 3) and 4), where more effort may be required to loosen off any 'crud', in order that it is removed thoroughly.

Marco.

---

Quote:

---

Originally Posted by ekymetal

Does this method remove static? lol:eek:

---

Oh yes. It removes absolutely everything! :eyebrows:

Quote:

---

Originally Posted by high.spirits

Hi Marco

What brushes do you use as there are so many options out there to choose from?

Thanks
Martin

---

Hi Martin,

I've continued to use the one that came with my VPI 16.5 RCM. The bristles on it are very stiff, which during cleaning, is essential for deep penetration of the record grooves. Highly recommended! You can buy spare VPI brushes from Analogue Seduction, although unfortunately they aren't cheap.

Hope that helps :)

Marco

Quote:

---

Originally Posted by Marco

Hi Martin,

I've continued to use the one that came with my VPI 16.5 RCM. The bristles on it are very stiff, which during cleaning, is essential for deep penetration of the record grooves. Highly recommended! You can buy spare VPI brushes from Analogue Seduction, although unfortunately they aren't cheap.

Hope that helps :)



Marco

---

Hi Marco,I have the same VPI machine as yourself and do use the VPI brush that was supplied with it. However a tip from a friend, who also uses a VPI, suggested using a piece of draught excluder brush, the type you fix to the bottom of a door! I have the aluminium strip with brush attached. You can cut pieces to the length you require and you get quite a lot out of a strip.
The brush I find is perfect and in fact I use it a lot more than the VPI brush. Works very well.

SPPV extremely good if you look at the price of brushes :)

Excellent tip, James - I like it and will look into it further :thumbsup:

Marco.

I've tried all sorts of brushes and things like brushes including paint pads and have never been satisfied. As for the draught excluder, well that's the stuff that the brush that comes with the Moth RCM is made of. I think that it's too stiff until it's been thoroughly soaked in the fluid. I was never happy with it, fearing that it may be causing damage. Bought a VPI brush to use instead.

Quote:

---

Originally Posted by The Grand Wazoo

I've tried all sorts of brushes and things like brushes including paint pads and have never been satisfied. As for the draught excluder, well that's the stuff that the brush that comes with the Moth RCM is made of. I think that it's too stiff until it's been thoroughly soaked in the fluid. I was never happy with it, fearing that it may be causing damage. Bought a VPI brush to use instead.

---

The draught excluder brush I use is less stiff than the VPI brush. What is really good is the fact you can rummage round loads of DIY stores and get the exact stiffness you want.

Mine has longer bristles than the VPI and is more flexible so it gets into the grooves better.

That's good to know.

Thanks guys very useful information.

I will have a look at some of our local DIY stores and may buy a VPI brush for reference.

Thanks again
Martin