+ Reply to Thread
Results 1 to 10 of 110

Thread: Recommend me a preamp please?

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Mar 2017

    Location: Seaford UK

    Posts: 1,861
    I'm Dennis.

    Default

    Ok Edwardion, S2000MP preamp specs.

    I/P sens. line 150mV
    I/P impedance 20k
    Distortion (THD+IMD) -120dB
    O/P level 1.0V
    O/P impedance 1 ohm
    Tape O/P 150mV
    Frequency response (-3dB) 1.5Hz and 500kHz.
    Six I/Ps, one with switchable MM/MC board installed
    Remote controlled
    Independent tape source selection.
    All connections unbalanced ccts, which actually produce less distortion than balanced ccts which are preferred by professionals because they allow the very long lengths of interconnects often needed in studios.
    Standby consumption 14W, when on 15W
    Serial No 97422

    Compared with the ATC it is 'just a little different', and very difficult to describe usefully.
    £450.

  2. #2
    Join Date: Mar 2017

    Location: West Sūžsēaxe

    Posts: 2,016
    I'm Edward.

    Default

    Quote Originally Posted by Pharos View Post
    Ok Edwardion, S2000MP preamp specs.

    ....
    ....

    Compared with the ATC it is 'just a little different', and very difficult to describe usefully.
    £450.
    Thanks for that. Something to consider. To be fair I will not be rushing to a decision. Still in early research phase.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •