+ Reply to Thread
Page 1 of 2 12 LastLast
Results 1 to 10 of 210

Thread: The Mike New Bearing Base Plate

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date: Feb 2008

    Location: http://www.homehifi.co.uk

    Posts: 6,288

    Default

    For New York that would be Westchester County. Either way, they are both in the US.

  2. #2
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by StanleyB View Post
    For New York that would be Westchester County. Either way, they are both in the US.
    Cheers, chaps. I suspected that it was somewhere in the US, but I don't know why the hell Mike couldn't just have said so, after I'd asked him the question four times!!

    On AoS, we like our members to know where each other comes from, and as this is a UK-based site, 'foreign' locations (towns and states) not ending with the country of origin, may be unfamiliar to some people.

    Therefore, if Westchester is in, say, Illinois, then the correct way to display one's location details would be: "Westchester, Illinois, USA".

    That is the layout I would like everyone to follow, especially those whose geographical location may not be instantly well-known to the majority

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  3. #3
    Join Date: Nov 2008

    Location: Banbury, Oxfordshire/Panteg is where my late father was born

    Posts: 4,382
    I'm Chris.

    Default

    Quote Originally Posted by StanleyB View Post
    For New York that would be Westchester County. Either way, they are both in the US.
    Westchester NY , some pics from Wikipedia






    Chris

    We've gone on holiday by mistake !

  4. #4
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Looks very nice indeed, Chris! But does Mike live in the Westchester in NY or Illinois?

    That's my point!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  5. #5
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 38,173
    I'm Martin.

    Default

    Quote Originally Posted by Marco View Post
    Looks very nice indeed, Chris! But does Mike live in the Westchester in NY or Illinois?

    That's my point!

    Marco.
    I think the Illinois one is West Chester - i.e two seperate words so I am going for the county in up state New York . Although IME some of our American cousins seem to have a fairly scanty knowledge of geography so you should consider the possibility that Mike is not entirely sure himself as to exactly where he is
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > JM Labs Focal Electra 926.

  6. #6
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    I think the Illinois one is West Chester - i.e two seperate words so I am going for the county in up state New York . Although IME some of our American cousins seem to have a fairly scanty knowledge of geography so you should consider the possibility that Mike is not entirely sure himself as to exactly where he is


    At least, with all this discussion, he'll now be sure to clear up the confusion!!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


  7. #7
    Join Date: Nov 2008

    Location: Banbury, Oxfordshire/Panteg is where my late father was born

    Posts: 4,382
    I'm Chris.

    Default

    Quote Originally Posted by Macca View Post
    I think the Illinois one is West Chester - i.e two seperate words so I am going for the county in up state New York . Although IME some of our American cousins seem to have a fairly scanty knowledge of geography so you should consider the possibility that Mike is not entirely sure himself as to exactly where he is
    That's a bit harsh .
    Chris

    We've gone on holiday by mistake !

  8. #8
    Join Date: May 2011

    Location: Westchester, NY, USA

    Posts: 202
    I'm Mike.

    Default

    Quote Originally Posted by Macca View Post
    I think the Illinois one is West Chester - i.e two seperate words so I am going for the county in up state New York . Although IME some of our American cousins seem to have a fairly scanty knowledge of geography so you should consider the possibility that Mike is not entirely sure himself as to exactly where he is
    Macca has it right - i dont know where i live.
    But Mike New knows. So according to the packing slip that came with the BBP, I live in NY.

    Which for the next couple of days, I am in the destructive path of hurricane Irene. So I have to get ready to bear down and go shopping before it swings by for a visit starting tomorrow. I will sleep better knowing that the added weight of BBP will keep my TT secure during the storm.


    There are also West Chester Cities in Ohio and Pensylvania.

    It seems that this thread has turned from the installation of the Mike New BBP to a geography lesson to where I live. I get the sense that Marco is really into geography, wants to stop by my place, or both.

    I have to go now, but keep the questions (or laughs) coming. There may be a delayed response because of the circumstances. For the questions I did not get a chance to answer, I will answer later.

    Reporting from Westchester -

    Mike
    Anyone who thinks CDs sound better needs to listen to my system. Besides, my cables sound better than yours.

    Technics SL1200-MK2 SE-1: MN Bearing + Baseplate + AL/CU Platter, Paul Hynes SR7 Power Supply, Isonoe Feet, SME V, Audio Technica AT33EV, CableMaker 1 Tonearm Cable
    Technics SL1200-MK2 SE-2: MN Bearing + Baseplate, Copper Mat, Paul Hynes SR7 Power Supply, Isonoe Feet, SME 309, Audio Technica ATOC9/MLII, CableMaker 1 Tonearm Cable

  9. #9
    Join Date: Sep 2010

    Location: High Peak, Derbyshire

    Posts: 2,241
    I'm Keith.

    Default

    Best of luck - hope Irene gives you a miss.
    Keith
    Analogue: Lenco L75 with 'PTP5' top plate in heavy birch ply plinth/re-wired Rega RB300/SAE 1000e HOMC Cartridge/Trans-Fi Reso-Mat/Moth RCM
    Files: Voyage MPD/Custom PC/Supra USB/Beresford ASYNCH-1/Beresford TOSlink cable
    CDP: Inca Katana SE
    DAC: Beresford Caiman MkII (LiPo Battery powered)
    Pre-Amp: Croft Micro 25 Power-Amp: Croft Series 7
    Speakers: DIY Frugel-Horn Mk3 ('FH3') + REL Strata subwoofer
    Headphones: Beyer Dynamics DT990 Pro (250 ohm)/Schiit Asgard Headphone Amp
    Cables - Interconnects: Mark Grant G1000HD Speaker Cables: Van Damme Blue
    Mains: Belkin PF30/Mark Grant DSP2.5 & DSP1.0 Rack: Target

    Office System: HP Win8 Laptop/JRiver/MF V-Link2/Beresford Bushmaster MkII/Topping TP20 Mk2/Mission 771e
    Bedroom System: Raspberry Pi/Raspbrian + MPD/HiFiBerry DAC/Topping TP20 Mk2/Mission 760i or DIY Hybrid Valve-MOSFET Headphone amp + Sennheiser HD595


    Gallery

  10. #10
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,012
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by CableMaker1 View Post
    It seems that this thread has turned from the installation of the Mike New BBP to a geography lesson to where I live. I get the sense that Marco is really into geography, wants to stop by my place, or both.
    Nope, Marco is simply interested in all members providing understandable information on their account profiles, as per the requirements of the site, particularly such as that pertaining to real names and geographical locations, which if you'd answered my question before, without me having to ask four times to obtain the information (in the end provided via third parties), wouldn't have caused this hoo-hah!

    Stay safe from hurricane Irene and enjoy your Techy

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.


    Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!

    Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!


+ Reply to Thread
Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •