Marco,
[Off topic] You tried those cables yet? [/Off topic]
Gaz, the Neotech is also OCC, although stranded, and mates up nicely with OCC plugs.
Marco,
[Off topic] You tried those cables yet? [/Off topic]
Gaz, the Neotech is also OCC, although stranded, and mates up nicely with OCC plugs.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Will have a play with a couple of options, promised myself I wouldnt though lol
Second thoughts...I’ll try Marcos option and probably call it quits.
Assuming it’ll sound more than good enough.
AC POWER
Hardwired 10kVA balanced mains powering entire system
AMPS
Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
SPEAKERS
Wharfedale Evo 4.4
DAC
PS Audio Directstream (Modded)
TURNTABLE
Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
PHONOSTAGE
Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
DIGITAL
CD PLAYBACK - Shanling ET3 CD Transport over i2s to Dac + MOVIE PLAYBACK Oppo 203 (Modded: Linear PSU, i2s output to Dac)
Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
Ipad Roon Remote.
Apple Music/ YouTube via AppleTV, fed to Shanling via Airplay 1 (losslessly) and onwards to Dac via Wireworld Silver Electra 7 i2s HDMI cable
SPEAKER CABLES
Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On "Blackcat Cable" Chris Sommivigo's advice - Yup, it sounds better)
INTERCONNECTS
All Balanced: Ghost+ recording studio XLR cables
Location: Troon
Posts: 2,476
I'm tony.
Strange you mentioning hum Gary ive noticed my BMU a tad noisy of late.
Weather/temperature increased load on the mains due to the proper winter we have been having?
I thought maybe my current set up was maybe taxing my 1500 bmu but your post is a bit too much of a coincidence.
Is the hum coming through the tweeter?
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & reg mods]. Funk Firm APM Achromat/Nagaoka GL-601 Crystal Record Weight/Isonoe feet & boots/Ortofon RS-212D/Denon DL-103GL in Denon PCL-300 headshell with Funk Firm Houdini/Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp/Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new, by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. LDR Stereo Coffee. Power Amps: Tube Distinctions Copper Amp fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Protect your HUMAN RIGHTS and REFUSE ANY *MANDATORY* VACCINE FOR COVID-19!
Also **SAY NO** to unjust 'vaccine passports' or certificates, which are totally incompatible with a FREE society!!!
Thanks matey
AC POWER
Hardwired 10kVA balanced mains powering entire system
AMPS
Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
SPEAKERS
Wharfedale Evo 4.4
DAC
PS Audio Directstream (Modded)
TURNTABLE
Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
PHONOSTAGE
Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
DIGITAL
CD PLAYBACK - Shanling ET3 CD Transport over i2s to Dac + MOVIE PLAYBACK Oppo 203 (Modded: Linear PSU, i2s output to Dac)
Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
Ipad Roon Remote.
Apple Music/ YouTube via AppleTV, fed to Shanling via Airplay 1 (losslessly) and onwards to Dac via Wireworld Silver Electra 7 i2s HDMI cable
SPEAKER CABLES
Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On "Blackcat Cable" Chris Sommivigo's advice - Yup, it sounds better)
INTERCONNECTS
All Balanced: Ghost+ recording studio XLR cables
AC POWER
Hardwired 10kVA balanced mains powering entire system
AMPS
Meridian 557 power Amp (Modded) / PS Audio BHK Preamp (Modded)
SPEAKERS
Wharfedale Evo 4.4
DAC
PS Audio Directstream (Modded)
TURNTABLE
Pro-Ject X8 balanced output via XLR / Ortofon Quintet Blue cartridge
PHONOSTAGE
Pro-Ject DS3 B balanced Input (TT and Phonostage powered by Pro-Ject Power box RS2 linear psu)
DIGITAL
CD PLAYBACK - Shanling ET3 CD Transport over i2s to Dac + MOVIE PLAYBACK Oppo 203 (Modded: Linear PSU, i2s output to Dac)
Tweaked AP-Linux based Roon Server into Oppo 203 as Roon endpoint
Ipad Roon Remote.
Apple Music/ YouTube via AppleTV, fed to Shanling via Airplay 1 (losslessly) and onwards to Dac via Wireworld Silver Electra 7 i2s HDMI cable
SPEAKER CABLES
Biwired: Duelund DCA10GA (Bass) Duelund DCA16GA (mid & treble) Duelund 12DCA used as jumpers (On "Blackcat Cable" Chris Sommivigo's advice - Yup, it sounds better)
INTERCONNECTS
All Balanced: Ghost+ recording studio XLR cables
I have got a bit mental with the cables. I have 16mm going into an industrial 32A switch to power the BMU and 2 off 10mm going into the Furutech double socket.
Later in the year I will be running 25mm cable into the dedicated CU instead of the 10mm T&E which is feeding it at present. I am copying the setup that is used in the Astoria recording studio as designed by Philip Newall.
How come you've got two T&E cables going into one double socket? I don't know the Furutech, but why would it have two sets of inputs ?
Can I assume you're replacing your 10mm2 T&E feeding your c.u. with tails? This is the normal installation procedure from either the meter or the junction box, surely. 10mm2 would be used for your radials (which I think you do). I have tails to my c.u. (with individual RCBOs) and 10 as well as 6 mm2 radials to (effectively)my kit.
I'm not familiar with balanced mains (nor really understand it), and don't use any mains regeneration units, though a local chap with pretty classy kit put one in, onto his one h/d radial and hasn't looked back.
The Furutech double socket is two separate sockets on one face plate so instead of using jumper wires from one socket to the other, I am using one 10mm LF-329 cable for each socket.
I will be replacing the 10mm cable with LF-329 25mm cable which is very well screened so hopefully will render my setup immune to the effects of RFI.
With the balanced mains transformer, it gets rid of any DC or RFI on the mains supply so it will sound the same even during peak usage times.
I do not have to wait until after 9-00 pm to get the best listening experience.