+ Reply to Thread
Results 1 to 3 of 3

Thread: Zu omen 1 DIY 0

  1. #1
    Join Date: Apr 2016

    Location: Gravesend and France

    Posts: 1,498
    I'm paul.

    Default Zu omen 1 DIY 0

    Over the years I have enjoyed building my own speakers, open baffles followed by front horns, bass reflex single driver standmounts that I still use in the office and others that maybe more by luck than judgement have all worked very well. They are all compromises as most things are to some degree but since buying the Zu's I have no urge to build any more. I had started to get lowther alerions built by a cabinet maker who then pulled out which was a shame as I hadn't the time to make them. The drivers are sitting in their boxes in the listening room and every time I go in there I think about one day building those alerions just to know how they sound. Those DX45's are so good at what they do best, that's from about 200hz up, unlike the shouty 8" lowthers these are breathtaking.
    But then today I listened to a variety of music in my list on Spotify including Boris Blanks Electrified album and wow they are incredible.
    Bakoon 13r Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus, project ds2 digital Rullit aero 8 field coils in tqwt speakers

    Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons yulong dac Sony STR6055 receiver Jvc QL-A51 direct drive turntable, Leema sub. JVC Z4S cart is in the house

    Garage system another Sony receiver, cassette deck


    System components are subject to change without warning and at the discretion of the owner.

  2. #2
    Join Date: Nov 2008

    Location: belgrade serbia

    Posts: 840
    I'm gordan.

    Default

    how do you like najda, did you build it from a kit or you have a cased version?
    Gordan.
    Speakers: Oris Swing MkII
    Amps: Thomas Mayer 300b/ Hiraga La Maison de L'Audiophile 20
    Preamp: Silver AVC by eng. Ferenc Lazar
    Phono Preamp: Shishido LCR by Solaja Audio
    Decks: Garrard 301 Martin Bastin reworked/plinthed with Fidelity Research FR64fx
    Garrard 401 in eng Ferenc Lazar solid wenge plinth with SME 3012/2
    Cartridges: SPU Spirit/ Koetsu Black revisited by eng. Salai/ Miyajima Shilabe
    Step Up Transformers: Tango MCT 999/ Ortofon T-5000/ Lumiere SUT
    Digital: Shigaclone by eng. Ferenc Lazar with Lampizator Amber II
    Wires: of sufficient length

  3. #3
    Join Date: Apr 2016

    Location: Gravesend and France

    Posts: 1,498
    I'm paul.

    Default

    Hi Gordan, hope you are well. I bought it from a guy in France, it has RCA and balanced connections but he forgot to mention that to use the rca's I had to disconnect a plug inside or it wouldn't work. So I ended up sending it back to him and then it was lost for a while and turned out to be the concierge where lived had signed for it and not given it to him. Anyway I got it back and it works very well. As I've stopped DIY at the moment it's being used as a Dac in my office set up. I did consider selling it but when I get the urge to build sone speakers it will still be here. I can't say I've really used it as intended but it can be set up simply or as complicated as you like. I would say DEQX is better in that it can measure and correct the driver phase errors and flatten the drivers response and do room correction onboard whereas with Najda measurements for room correction would be done separately and then adjustments made in Najda. But the price difference is huge.
    Bakoon 13r Denon DP80 Stax UA-70 Shure Ultra 500 in a Martin Bastin body with jico stylus, project ds2 digital Rullit aero 8 field coils in tqwt speakers

    Office system, DIY CSS fullrange speakers with aurum cantus G2 ribbons yulong dac Sony STR6055 receiver Jvc QL-A51 direct drive turntable, Leema sub. JVC Z4S cart is in the house

    Garage system another Sony receiver, cassette deck


    System components are subject to change without warning and at the discretion of the owner.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •