+ Reply to Thread
Page 17 of 24 FirstFirst ... 71516171819 ... LastLast
Results 161 to 170 of 240

Thread: Nick G modified Lentek Head Amp

  1. #161
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    Quote Originally Posted by Floyddroid View Post
    Isn't that taking the piss though Jez?
    When in Rome... "pal".
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

  2. #162
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,542
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Oi - let's keep the vibe nice and friendly, guys!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  3. #163
    RothwellAudio Guest

    Default

    Quote Originally Posted by 337alant View Post
    Here are some notes I made when I was repairing Steve's
    I should have sketched it out at the time
    Note i dont know what the NPN transistors are as there is no markings
    Alan
    Thanks for the pictures. I tried to work out the circuit last night but it proved very difficult without being able to see the component side of the board and the tracks together. I failed miserably

  4. #164
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    I'm working on it and about 2/3rd's of the way there. I expect to post the diagram today. Indeed it is not easy!

    I did ask before starting if anyone else is also planning to attempt it in order to avoid the prospect of two or more of us "wasting" hours on the same task...
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

  5. #165
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    Here yer go folks...



    Edit: C1,2,3,4 marked 10uF are 47uF
    Last edited by Arkless Electronics; 08-12-2016 at 12:38.
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

  6. #166
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,542
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Nice one, Jez. Much appreciated!

    So when are you building one for us to listen to?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  7. #167
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    Quote Originally Posted by Marco View Post
    Nice one, Jez. Much appreciated!

    So when are you building one for us to listen to?

    Marco.
    The design is better in terms of potential sound quality than I had assumed... but has it's issues and limitations...
    The ZTX transistors are not the original type of course but I put them in the diagram cos they would probably work pretty well in this application and are readily available. All values are as in original Lentek. Resistor etc for battery check led not shown.

    I've no plans to build any as such but if anyone wants to commission one then I'll take the job of course. I would vastly prefer to supply just a tested board for people to put in their own casework. Various component types and values would be upgraded compared to a standard one, along similar lines to those modded by Nick. £80 delivered for board only.
    The possibility of a "Lentek Head Amp; The Arkless Edition" is of course present.... with all sorts of improvements to the original. It's just a push pull common emitter amplifier at the end of the day and various compromises are present to make it a bit cheaper and allow the use of just the one battery. It should be possible to make one with some extra "house-keeping" circuitry and twin 9V batteries or mains PSU which would be considerably better than the original but at a much higher price etc..
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

  8. #168
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    I wonder how long it will take for a Chinese made clone at £7.50 to appear now?
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

  9. #169
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,542
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Arkless Electronics View Post
    The design is better in terms of potential sound quality than I had assumed... but has it's issues and limitations...
    That's reassuring, as I didn't think I was deaf

    Limitations? Of course, as with any piece of hi-fi equipment, especially a budget design like that.

    The possibility of a "Lentek Head Amp; The Arkless Edition" is of course present.... with all sorts of improvements to the original. It's just a push pull common emitter amplifier at the end of the day and various compromises are present to make it a bit cheaper and allow the use of just the one battery. It should be possible to make one with some extra "house-keeping" circuitry and twin 9V batteries or mains PSU which would be considerably better than the original but at a much higher price etc..
    I like the idea of the twin battery thing, as it's something I've also contemplated recently, so might take you up on that

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #170
    Join Date: Oct 2012

    Location: NE England

    Posts: 4,163
    I'm Jez.

    Default

    Quote Originally Posted by Marco View Post
    That's reassuring, as I didn't think I was deaf

    Limitations? Of course, as with any piece of hi-fi equipment, especially a budget design like that.



    I like the idea of the twin battery thing, as it's something I've also contemplated recently, so might take you up on that

    Marco.
    The twin battery idea I'm talking about is 100% different to that which you are no doubt talking about and involves a complete redesign of the circuitry whilst keeping the basic topology. It would likely only be practical in a new Arkless version. However, there are reasons why twin batteries as you are probably talking about would also be an improvement yes.... if they will fit! A new on/off switch would have to be fitted as well.
    Arkless Electronics-Engineered to be better. Tel. 01670 530674 (after 1pm)

    Modded Thorens TD150, Audio Technica AT-1005 MkII, Technics EPC-300MC, Arkless Hybrid MC phono stage, Arkless passive pre, Arkless 50WPC Class A SS power amp, (or) Arkless modded Leak Stereo 20, Modded Kef Reference 105/3's
    ReVox PR99, Studer B62, Ferrograph Series 7, Tandberg TCD440, Hitachi FT-5500MkI, also FT-5500MkII
    Digital: Yamaha CDR-HD1500 (Digital Swiss army knife-CD recorder, player, hard drive, DAC and ADC in one), PC files via 24/96 sound card and SPDIF, modded Philips CD850, modded Philips CD104, modded DPA Little Bit DAC. Sennheiser HD580 cans with Arkless Headphone amp.
    Cables- free interconnects that come with CD players, mains leads from B&Q, dead kettles etc, extension leads from Tesco

+ Reply to Thread
Page 17 of 24 FirstFirst ... 71516171819 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •