Bel Canto Phono3 MM / MC phonostage

[Open Door]

In excellent condition with original manual and box. Black in colour.

£Sold incl UK postage.

Bandwidth • 1Hz-50KHz
RIAA Accuracy • 20Hz-20KHz +/- 0.2 dB
Signal to Noise Ratio 40 dB gain • >80 dB A weighted, re 5mV RMS in Distortion @ 2 Volt RMS/1kHz • <0.01%
Maximum Output Level • 9.5 V RMS
Output Impedance • 100 Ohms Single Ended
Input Impedance • 47K Ohms Nominal (all Resistor Switches UP)
Gain Level Options • 40 dB (100X) and 60 dB (1000X)
Idle power draw • 10 Watts
Dimensions • 8.5” W x 12.5” D x 3” H (216 mm x 318 mm x 75 mm) Weight: • 10lbs. (4.5 kg)

The Bel Canto Phono3 is designed to provide low noise operation for moving coil and moving magnet phono car- tridges and high accuracy audio RIAA equalization:
• All analog, low noise, low distortion Class A integrated circuit architecture. • High Current output buffer for driving
any load.
• 4-layer PC board design for superior
signal routing, grounding and power
supply routing.
• Latest generation of low-noise, low-dis-
tortion high speed audio amplifiers,
and output drivers provide superb meas- ured and subjective audio quality.
• Multi-stage power supplies for precise power to the sensitive analog circuitry • Precision audio grade resistors and
precision metal foil film capacitors in
the audio signal path.
• Ultra low noise second stage dual inde-
pendant regulation for the analog amplifier sections.
• Single-stage amplifier and classA oper- ation to insure minimal signal degreda- tion and maximum dynamic perform- ance.
• Rear Panel gain and load switching using precision sealed double wiping gold contact switches.

IMG_2385.jpgIMG_2386.jpg

[Open Door]

Open to offers

[Open Door]

Sold

[rdpx]

What did it sell for, if you don't mind my asking?

Sent from my GT-I9195 using Tapatalk

[Audio Al]

What did it sell for, if you don't mind my asking?

Sent from my GT-I9195 using Tapatalk

I would say money £ British pounds sterling

[Marco]

Hi Robert,

Was this a trade or private sale? If it was the former, it should've been posted in your trade room.

Marco.

[Open Door]

Hi Robert, as Zoomer says - it went for cash (bank transfer), sold via another forum.

Marco - all recent posts were private, I no longer trade.

[rdpx]

May I ask what price you were asking here?

The reason I ask is that these sales threads are a very useful resource not only for buying and selling, but also for people who want to see what prices things are fetching on the market. When the original post is edited with the price changed to "£ SOLD" it removes this very useful information.

Sent from my GT-I9195 using Tapatalk

[Open Door]

May I ask what price you were asking here?

The reason I ask is that these sales threads are a very useful resource not only for buying and selling, but also for people who want to see what prices things are fetching on the market. When the original post is edited with the price changed to "£ SOLD" it removes this very useful information.

Sent from my GT-I9195 using Tapatalk

It was listed at £595 (I think if memory serves right).

[rdpx]

Thanks!

Sent from my GT-I9195 using Tapatalk