Quote Originally Posted by walpurgis View Post
If you now have the 66 mid fitted, you may want to compare the components on the 66 crossover with the 44. If there are differences, I reckon the best move would be to go to 66 spec.
Your right, the inductors need to be changed to 0.35mH and 2.2mH, I used these http://loudspeakerfreaks.com/Product...roduct_ID=9402, http://loudspeakerfreaks.com/Product...roduct_ID=9481 as the closest match to original DCR. I've also replaced the HF2000 with the SEAS 19TFF which requires an alternative inductor, optimised the placement of the inductors and mounted the crossover externally, I started a thread to document this but work has got the better of me over the last 12 months.

Quote Originally Posted by zingyzangyzongy View Post
Hi Darren
Thanks for your help. What thicknesses would you use for that, and are you doing a straight copy of the 44s? I think ply is way more attractive than mdf anyway - I want to see the wood grain and ply layers.
Tempting though your 66 mids sound, I think I will stick with the stock drivers for now while I read that thread... again ;-)
I'd stick with the original thickness 3/4 / 19mm, I've spoken to Ken about this and the only modification he'd make to the original 66 cabs would be to double up for the top and bottom panels i.e. 1.5" / 38mm. I'd also flush mount the baffle as it is with the 66's