+ Reply to Thread
Results 1 to 6 of 6

Thread: Help Required. Re-centre a Kef B110

  1. #1
    Join Date: Jan 2008

    Location: Witney Oxon

    Posts: 893
    I'm Martyn.

    Default Help Required. Re-centre a Kef B110

    Have Forum members any ideas on how to re-centre
    the cone on a Kef B110?
    Inverting it for a time can work, I understand.

    Would trying this in an airing cupboard help,
    where the raised temperature could help the suspension
    to shift.

    I don't really want to ship it to a repairer, with what could be
    a substantial bill to pay.

  2. #2
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,612
    I'm Geoff.

    Default

    You could try my old hairdryer trick. Locate exactly where the coil is rubbing and pull it gently towards the opposite side of the speaker frame. I usually use an elastic band wrapped around the coil former to apply slight force in the right direction and tape the band to the chassis. Then use the hairdryer to heat the rear spider all round (don't overdo the heat), this relaxes the spider. Then go around the spider again with the dryer on cold and that should 'set' it in a new alignment. This trick usually works, I've used it on at least half a dozen rubbing speaker units.

    There's always the possibility that the speaker may have been overdriven causing the lacquer around the coil to bubble and foul the gap. In that situation this trick won't work.
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  3. #3
    Join Date: Jan 2008

    Location: Witney Oxon

    Posts: 893
    I'm Martyn.

    Default

    Quote Originally Posted by walpurgis View Post
    You could try my old hairdryer trick. Locate exactly where the coil is rubbing and pull it gently towards the opposite side of the speaker frame. I usually use an elastic band wrapped around the coil former to apply slight force in the right direction and tape the band to the chassis. Then use the hairdryer to heat the rear spider all round (don't overdo the heat), this relaxes the spider. Then go around the spider again with the dryer on cold and that should 'set' it in a new alignment. This trick usually works, I've used it on at least half a dozen rubbing speaker units.

    There's always the possibility that the speaker may have been overdriven causing the lacquer around the coil to bubble and foul the gap. In that situation this trick won't work.
    Thank you, Walpurgis.
    Your method worked perfectly.

    Many thanks.
    Martyn.

  4. #4
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,612
    I'm Geoff.

    Default

    Quote Originally Posted by Martyn Miles View Post
    Your method worked perfectly.
    Of course!

    Glad you're sorted!
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  5. #5
    Join Date: May 2008

    Location: A Strangely Isolated Place in Suffolk with Far Away Trains Passing By...

    Posts: 14,540
    I'm David.

    Default

    B110 - spawn of the devil
    I can't go on and I can't go back, I don't feel so matter of fact,
    I tried and tried to make good sense, What's the good to try it all again?

  6. #6
    Join Date: Jan 2008

    Location: Witney Oxon

    Posts: 893
    I'm Martyn.

    Default

    Quote Originally Posted by DSJR View Post
    B110 - spawn of the devil
    DJSR - Always one for a relevant comment!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •