I'll be interested to hear what you make of it once you've 'attuned' your ears to what it does Marco.
Moderator & Terminator!
Location: N E Kent
Posts: 51,627
I'm Geoff.
I'll be interested to hear what you make of it once you've 'attuned' your ears to what it does Marco.
It is impossible for anything digital to sound analogue, because it isn't analogue!
Moderator
Location: Derbyshire
Posts: 9,351
I'm Josie.
Cool.... let us know how you get on.
Ultrafide U500DC power amplifier - Croft Vitale )highly modified) - TRIO L-07D Turntable - Denon DL103C1 - Funk Firm Houdini - Lentek MC head amp - 15" Tannoy Monitor Gold Loudspeakers in Lockwood Major cabinets (From Trident Studios) - Tannoyista SPEC 3 Custom Crossovers - VanDamme Black Speaker Cable
Tannoyista.com - Audio Equipment Reviews
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,554
I'm AudioAl'sArbiterForPISHANTO.
That's precisely what I'm doing now, Geoff, and I'm liking very much what I'm hearingOriginally Posted by walpurgis
From experience, after fitting the DACT stepped attenuator on the Croft, I know that things get better the more the resistors are used and processing a music signal, so that's why I'm not forming any conclusive opinions yet.
The dual-mono stepped attenuators on the Goldpoint, having 47 steps, also work quite differently, in terms of where my favourite volume level kicks in, from how that happens on the 24-position DACT stereo stepped attenuator on the Croft (and also with that being active), so I'm acclimatising to that effect, too.
However, even at this early stage, I can say that the Goldpoint is defo a keeper!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Drunken Administrator
Location: Staffordshire, England
Posts: 43,376
I'm Martin.
Will be interesting to see how it stacks up against the NVA P90SA. The cost is very similar. How much did they sting you in duty and tax?
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,554
I'm AudioAl'sArbiterForPISHANTO.
Lol - that's a sore point... £115!
Still, given what I'm hearing (and the build quality of the unit), it was worth it
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,554
I'm AudioAl'sArbiterForPISHANTO.
Yup, we can compare it with your NVA, no problem. I'll also be bringing the Goldpoint to NEBO
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Drunken Administrator
Location: Staffordshire, England
Posts: 43,376
I'm Martin.
I did find that my NVA improved with the resistors burning in. I was unaware that this would happen but heard it anyway. Don't forget you have to burn in each step individually.
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,554
I'm AudioAl'sArbiterForPISHANTO.
Indeed... However, I doubt I'll be using any of the ones after the 1 o'clock position on the dials, unless I want to deafen myself!
All resistors (and caps) benefit from burning in. I've experienced the effect many times, so those used on stepped attenuators should be no different. To that end, I've left a CD on repeat (with the Goldpoint set at my favourite level for normal listening and the Copper amp off), whilst we're having our dinner and watching some TV.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Moderator & Terminator!
Location: N E Kent
Posts: 51,627
I'm Geoff.
Shame I'm not nearer. My MingDa TVC would make a very interesting comparison.Yup, we can compare it with your NVA, no problem. I'll also be bringing the Goldpoint to NEBO
Marco.
It is impossible for anything digital to sound analogue, because it isn't analogue!
Senior Member
Location: SE London/Surrey
Posts: 870
I'm Pete.
I'm looking forward to an unbiased view of the P90sa vs the Goldpoint... I once owned the former and regret moving it on
[mischievous mode on] Perhaps a blind test with the listeners not wearing their blinkers is in order[mischievous mode off]
CDP: Primare CD31 Amp: Audio Note Oto SE DAC: M2Tech Young & Van Der Graaf PSU Speakers: Tannoy Cheviots
Streaming: bespoke Korus server with SOtM soundcard, AudioQuest Jitterbug & Furutech GT2 USB cable
Speaker Cable: Tellurium Q Black - Interconnects: MS Audio/Klotz MC5000
Come Chill With Me...
https://www.mixcloud.com/orbscure
http://theorbscureddj.blogspot.co.uk
+ play + enjoy + float + dream +
Posting Permissions
Reply With Quote
