Senior Member
Location: Curacao, Netherland Antilles
Posts: 476
I'm Stuart.
Hi All!
Anyone had experience with these:
http://www.ebay.com/itm/191511813979...%3AMEBIDX%3AIT
I am looking for something non-fatiguing (i currently have Ushers and i can say they are too fatiguing for me, even though i have tried many sources and amps)
New System (so far): Meridian 506 CD/ALAC -> Unison Research Little Italy -> Spendor S5e
Secondary system: Airport Express -> BeoLab 3 Speakers (still need replacing - too fatiguing)
TV Room: Marantz NR 1504-> Usher S520/525 speakers
Original System: NAD C541 CD Player -> NAD C340 Amp -> lamp cord -> B&W CM2 Speakers, Ipod/Itunes ALAC- secondary source
Moderator & Terminator!
Location: N E Kent
Posts: 51,600
I'm Geoff.
This Belden screened mains cable looks decent:
http://www.ebay.co.uk/itm/NEW-BELDEN...item51c557dc4d
I may try a few metres.
It is impossible for anything digital to sound analogue, because it isn't analogue!
Fount Master & Administrator
Location: Essex
Posts: 37,695
I'm openingabottleofwine.
At £15 a metre!
Barry
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,460
I'm AudioAl'sArbiterForPISHANTO.
It's good stuff, but I now generally prefer using thick gauge solid-core cable for mains leads. Makes sense, as that's what's in the wall already (with twin & earth), and plus it sounds better, to my ears, than multi-strand, except in low-current applications, such as with CDPs and small PSUsOriginally Posted by walpurgis
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Yorkshire
Posts: 4,235
I'm Andr'e.
I cannot be doing with Stiff Mains cable they have to be flexible.. For that i use Black Rhodium Ag plate Cu Mains cable.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,460
I'm AudioAl'sArbiterForPISHANTO.
It can be a PITA to solder/work with, but after that, I just find that the finished solid-core mains leads bend into whatever shape you want them (kind of like heavy-duty wire wool), so I don't find their stiffness a problem.
Better stiff than floppy, I say (and Tabatha agrees)!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Yorkshire
Posts: 4,235
I'm Andr'e.
Not referring to the workability i am referring to the factors such as you need a lot of space behind equipment, you cannot use short runs etc..No excess leads on my gear they have all be tailored for neatness, it's not possible with a stiffy
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,460
I'm AudioAl'sArbiterForPISHANTO.
Hehehe... No worries.
I can use short runs because the dedicated mains for the hi-fi is directly behind my system (no more than 1m away from the kit), which has plenty of space behind it, so I can arrange everything neatly. Therefore, 'stiffies' aren't a problem. Mine have nice thick 'bell-ends' (plugs) on them, too!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Yorkshire
Posts: 4,235
I'm Andr'e.
i hope you give em a good polish on a regular basis
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,460
I'm AudioAl'sArbiterForPISHANTO.
Yesh, they get buffed to a shine with a big wire brush... Oi loikes pain!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Posting Permissions
Reply With Quote
