Indeed. It's that big CHUNKY platter I love (bloody gorgeous it is) and something which is sadly lacking in the design of most direct-drives, for reasons that I'm not entirely sure...
Marco.
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,534
I'm AudioAl'sArbiterForPISHANTO.
Indeed. It's that big CHUNKY platter I love (bloody gorgeous it is) and something which is sadly lacking in the design of most direct-drives, for reasons that I'm not entirely sure...
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Senior Member
Location: Birmingham
Posts: 7,295
I'm James.
Stunning Turntable Alan especially with the SME.
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Thanks guys, it is a lovely turntable and it sounds good as well and its got a lid to keep the dust of it
Marco I will bring it to the NEBO4 and you can see it in the flesh
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,534
I'm AudioAl'sArbiterForPISHANTO.
Oh goody!
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,785
I'm Andrew.
Alan,
It looks much better now with the SME strapped it to compared to when I saw it in your merc! Stunning, I hope it sounds as good as it looks.
Andy
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Drunken Administrator
Location: Staffordshire, England
Posts: 43,359
I'm Martin.
Alan
I have the HFW article somewhere I will see if I can dig it out and bring it along to NEBO for you.
Current Lash Up:
TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Great stuff Martin hope you can find it, look forward to meeting you tomorrow
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Voyager Mono block amplifiers
Latest project is building a pair of Voyager Mono Block Amplifiers using the excellent Avondale NCC200 amplifier modules.
Everything is built up from mother boards and I am trying to use the best components within reason.
I have fancied a set of monoblocks for a while as my previous experience with them is that they seem to give a more effortless delivery and better channel separation and a bigger 3D image which is something I personally like
I have started the amps and have completed all of the circuit boards but there is still some case work left to do and getting the wiring neat and tidy so its going to take a while yet as work commitments has taken over for now so I have had to put them to one side
Present progress is below so you can see they are taking shape anyway
Build thread here http://theartofsound.net/forum/showt...ower-amp-Build
voyager 6 by 337alant, on Flickr
voyager 8 by 337alant, on Flickr
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Well I finally got both of my Voyager Monoblock amps completed and installed in my main system
Wow what an excellent pair of amps they sound superb after only 3 day's running
Going to give them a few weeks before final evaluation.
IMG_1501 by 337alant, on Flickr
IMG_1464 by 337alant, on Flickr
IMG_1462 by 337alant, on Flickr
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Moderator & Terminator!
Location: N E Kent
Posts: 51,620
I'm Geoff.
Excellent. They look great Alan. Tell us how they are after they've settled in.
It is impossible for anything digital to sound analogue, because it isn't analogue!
Posting Permissions
Reply With Quote