+ Reply to Thread
Page 29 of 1130 FirstFirst ... 19272829303139791295291029 ... LastLast
Results 281 to 290 of 11299

Thread: Bargains on ebay? (Part 2)

  1. #281
    Join Date: Apr 2012

    Location: Co. Durham

    Posts: 1,966
    I'm Stephen.

    Default

    Well, my "Geoff's Special" (Toshiba SR 370) has arrived. Looking at the packaging doubts started to form. And they were realized when it was opened. All the feet smashed, one side of the cover cracked (platter taped in place and came adrift. Not sure why it has to be such a problem to put a platter under a deck when posting it.) and two of the four front edges chipped. Luckily it was the bottom set so less obvious. Went over it with Duraglit which took the newness off the chipped areas and cleaned it up. It was listed as having a speed stability problem and when I looked inside found a pretty basic single transistor regulator, which I'll rebuild.

    Nice platter. Thought it might have weighed a bit more.
    Attached Images Attached Images

  2. #282
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,600
    I'm Geoff.

    Default

    Shame about the damage Stephen. It's worth getting it running though.

    I nearly bid on it myself. I even messaged the guy to ask him if he could pack it safely and pointed out that I'd want the lid and turntable spindle protected. His reply was not encouraging. Suggesting it would be "at the mercy of the carriers".
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  3. #283
    Join Date: Aug 2010

    Location: Torquay, Devon.

    Posts: 5,683
    I'm Shane.

    Default

    Quote Originally Posted by dantheman91 View Post
    Very Very Very Strange just thinking what happened to you dude ^ and then you post Welcome back man.......
    Cheers Dan!

    S.

  4. #284
    Join Date: Apr 2012

    Location: Co. Durham

    Posts: 1,966
    I'm Stephen.

    Default

    Quote Originally Posted by walpurgis View Post
    Shame about the damage Stephen. It's worth getting it running though.

    I nearly bid on it myself. I even messaged the guy to ask him if he could pack it safely and pointed out that I'd want the lid and turntable spindle protected. His reply was not encouraging. Suggesting it would be "at the mercy of the carriers".
    I was going to do the same Geoff, but I thought he might have used a bit of common sense. I can replace the feet and could have a go at the corners but the damaged lid is nothing I can do about. I suppose it could have been worse.

    I like the simplicity of styling it has. And as you have one, thought it must be pretty reasonable. Looking on the 'net I found it said to compare to an SP10 MK I. Don't remember what Haden B. had to say about it in Hi Fi World.

  5. #285
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,600
    I'm Geoff.

    Default

    I have a missing foot on my spare one. I may resurrect/refurb it sometime, the feet should be easy to replace with something else and the hefty plinth will spray up nicely. Hope you get yours sorted.
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  6. #286
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,460
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Mr Kipling View Post
    Well, my "Geoff's Special" (Toshiba SR 370) has arrived. Looking at the packaging doubts started to form. And they were realized when it was opened. All the feet smashed, one side of the cover cracked (platter taped in place and came adrift. Not sure why it has to be such a problem to put a platter under a deck when posting it.) and two of the four front edges chipped.
    Was this an ebay sale? If so, I presume you’ve left the inconsiderate idiot negative feedback!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  7. #287
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,460
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by walpurgis View Post
    I nearly bid on it myself. I even messaged the guy to ask him if he could pack it safely and pointed out that I'd want the lid and turntable spindle protected. His reply was not encouraging. Suggesting it would be "at the mercy of the carriers".
    Who is this twat, Geoff?

    Name and shame, I say, so in future we can all avoid him (or her) like the plague… If you’re going to sell kit and receive payment for it, then bloody well do your ABSOLUTE BEST to ensure that it gets to the person you’ve sold it to in one piece!!

    Lazy, waste of space fuckers….

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  8. #288
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,319
    I'm Martin.

    Default

    Yep - too many people blame it on the carriers when the real cause of the damage is they were too idle to pack the bloody thing properly in the first place.
    'The couriers have played football with it' - no they haven't but neither have they treated it like it was a Faberge egg due to be presented to the Queen - because they are sorting thousands of parcels and yours is no more important than anyone else's. So get the effing bubble wrap out and do a proper job.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  9. #289
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,460
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Indeed… I think Stephen’s taking it all rather well. I’d be losing the plot!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #290
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,600
    I'm Geoff.

    Default

    If Stephen is hanging onto the TT, I'd suggest he asks for a part refund at least. Say 40% or 50%. The damage warrants it. He can send the guy photos of the damage via the eBay messaging facility.
    It is impossible for anything digital to sound analogue, because it isn't analogue!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •