+ Reply to Thread
Page 99 of 123 FirstFirst ... 4989979899100101109 ... LastLast
Results 981 to 990 of 1228

Thread: The Mike New Technics Bearing

  1. #981
    synsei Guest

    Default

    Has anyone stopped to consider that this may be the meanderings of a chap who perhaps lays some of the blame for the failure of his business at the door of AoS? I will not defend Richard if this turns out to be the case as there were clearly other factors in play, not least of which was his lackadaisical approach to returning customers items, however we do need to be measured in our responses.

    Vantage gave those with less disposable income a route into the Techie upgrade market which otherwise would have been prohibitively expensive. Competition is good because it encourages innovation and offers the customer a choice, which is doubly important in a market this small. If Richard is planning to re-launch Vantage my advice would be that he concentrate on the positives moving forward and as a matter of urgency, put right the wrongs which contributed to the collapse of the original concern.

  2. #982
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,466
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Hi Dave,

    Quote Originally Posted by synsei View Post
    Has anyone stopped to consider that this may be the meanderings of a chap who perhaps lays some of the blame for the failure of his business at the door of AoS?
    I fail to see how he could consider that to be the case.

    Up until Richard's business collapsed and he started his shenanigans of holding onto people's equipment (which should've been modified as agreed), in some cases for more than a year, seemingly because he was unwilling to make a proper effort to return it, and so instead appeared to take the decision to hide, hoping that it would all go away, Vantage Audio Technics modifications were actively endorsed and promoted here, and as such Richard would've made numerous sales.

    If he's now annoyed because some of his disgruntled customers complained here, by highlighting their displeasure, which no doubt would've generated him some bad publicity, then I'm afraid that's his fault for behaving the way he did!

    If we receive evidence that Richard has returned all, or at least the majority of the kit outstanding to his customers, and has apologised to them for his misdemeanours, and that he wants to start again with a clean slate, then AoS and its members will support him and wish him all the best.

    Therefore, it's in HIS interests to do the right thing and stop filling the heads of impressionable people like Chris with completely false 'facts' about bearings, apparently to discredit the products of a major competitor. It's as simple as that.

    If there's one thing in business that will almost certainly backfire on you, big-time, it's rubbishing the competition!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  3. #983
    synsei Guest

    Default

    Erm, I think I said most of that in my post, although in not so many words... Note the operative word 'may' in the first sentence...

  4. #984
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,466
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Sure. I was simply pointing out that if you are right, then he has no valid justification for feeling that way, and should simply accept responsibility for his behaviour and the situation that he currently occupies. The fact is, it's no-one else's fault but his own.

    However, all he seems to be doing at the moment is shooting himself in the foot!

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  5. #985
    synsei Guest

    Default

    Agreed. There is a place for his products in the market place and plenty of potential for development, he just needs to stop overstepping his boundaries by taking on more work than he can cope with.

  6. #986
    Join Date: Aug 2009

    Location: Staffordshire, England

    Posts: 43,322
    I'm Martin.

    Default

    I may be mistaken but I think Chris has pointed out already on PFM that these comments re the MN bearing were made to him quite a long time ago now when Vantage was actually active and trading.
    Current Lash Up:

    TEAC VRDS 701T > Sony TAE1000ESD > Krell KSA50S > Troels Gravesen Faital 3WC-15.

  7. #987
    Join Date: Sep 2009

    Location: Essex, UK

    Posts: 3,439
    I'm Andy.

    Default

    System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+

    Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;


    1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands

    2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.




















    Me so horny- Impulse H6 Horny

  8. #988
    Mike_New Guest

    Default

    Quote Originally Posted by Macca View Post
    I may be mistaken but I think Chris has pointed out already on PFM that these comments re the MN bearing were made to him quite a long time ago now when Vantage was actually active and trading.
    Then why ....... would he want to regurgitate all this rubbish now???? I guess I realy feel sorry for him.
    As I write this I am enjoying an excellent bottle of red and listening to Beethoven's Pastoral, Deutsche Grammophon, Herbert von Karajan
    and I think to myself why would anyone waste their time listening to CDs

  9. #989
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,466
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    Quote Originally Posted by Mike_New View Post
    Then why ....... would he want to regurgitate all this rubbish now????
    Indeed... It smacks of an agenda.

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  10. #990
    Join Date: Nov 2008

    Location: Valley of the Hazels

    Posts: 9,143
    I'm AMusicFanNotAnAudiophile.

    Default

    Quote Originally Posted by Mike_New View Post
    Jeepers; I did not know that MAC made cup cakes!!
    http://en.wikipedia.org/wiki/Muffin_Man_%28song%29

    Chris



    Common sense isn't anymore!

+ Reply to Thread

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •