Senior Member
Location: Toulouse, France
Posts: 7,176
I'm Kevin.
What's the harm in trying one? I may do so at the end of the month.Originally Posted by REXTON
Do you guys think I should play catch up and buy one of these. I'm still with the Cu/Al platter from yonks ago! You guys have been through ETP and then Funk platters, I'm still on my first!
I hope Mr MCRU has a few?
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Banned
Location: Huddersfield
Posts: 3,358
I'm David.
I put you one aside ages ago!
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,775
I'm Andrew.
I love the original. I've never seen a need to change. The thing I personally love is it's ability not to flatter a recording. You get to hear if the recording is crap or not. Now if the new platter can still do that and improve what I'm hearing then it might be a buy.Depends what you're looking for, Andy. If you're happy with what you've got, then stick with it
Marco.
Correct, might give Dave a call..
DAVE........
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Site Owner/Administrator
Location: Wrexham, North Wales, UK
Posts: 110,431
I'm AudioAl'sArbiterForPISHANTO.
Do you think I'd be using one if it didn't?
Remember that I've used all three platters (MN aluminium, Funk and MN ETP), so I know intimately what they all do well.
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
I've used Technics > MN Aluminium > Funk > MN ETP and the sound quality improved at every stage. Midrange neutrality, fine detail and lack of any harshness make the ETP a stand-out. Bass quality is extremely good, too.
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,775
I'm Andrew.
Yep I dont doubt that at all.Do you think I'd be using one if it didn't?
Remember that I've used all three platters (MN aluminium, Funk and MN ETP), so I know intimately what they all do well.
Marco.
That sounds promising. Whilst I appreciate Bass is not the be all and end all of hifi reproduction, it does remain quite important to me as I have a large (~50%) rock collection and bass heavy material. The lack of harshness is also a stand out, I fell out with AT cartridges on my techie and went the Ortonfon route and whilst this improved things no end I can still detect a shrill edge on some recordings. Perhaps this platter could removed this?
Looks like one might be heading my way.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Top Ranking Member
Location: London
Posts: 4,411
I'm Robert.
I'd say go for it, It's not like you wont get something for your current platter. BTW - You've spent some serious money on kit and ancileries by the look of things. I think some pics are overdueYep I dont doubt that at all.
That sounds promising. Whilst I appreciate Bass is not the be all and end all of hifi reproduction, it does remain quite important to me as I have a large (~50%) rock collection and bass heavy material. The lack of harshness is also a stand out, I fell out with AT cartridges on my techie and went the Ortonfon route and whilst this improved things no end I can still detect a shrill edge on some recordings. Perhaps this platter could removed this?
Looks like one might be heading my way.
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,775
I'm Andrew.
I'd say go for it, It's not like you wont get something for your current platter. BTW - You've spent some serious money on kit and ancileries by the look of things. I think some pics are overdue
Well you can see my 301 and how it turned out here
http://theartofsound.net/forum/showt...ration-project
and my technics thread can be found here
http://theartofsound.net/forum/showt...ght=1210+gonna
My external x-o for the Tannoys can be seen in the RFC news thread forum
I'm a little shy of taking photo's as I'm crap at it.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Senior Member
Location: Fredrikstad, Norway
Posts: 236
I'm Chris.
Can any of you lucky ETP owners please make a Youtube video with the platter spinning and playing a record? It would be great to see a moving ETP and not just pictures
Turntable 1: Technics SL1210M5G/ KAB PSU/ KAB Fluid Damper
Turntable 2: Rega P3 (new) Tangospinner & dual belt/ Rega Neo
Amplifier: Rega Elex-R
RIAA: Rega Fono mk3 & Schiit Mani
Speaker: Klipsch RP280f
Cartridge: Rega Exact & Nagaoka MP-110
Senior Member
Location: Toulouse, France
Posts: 7,176
I'm Kevin.
Just put the picture on your deck, and press start.
Kevin
Too busy enjoying the music....
European loan coordinator for Graham Slee HiFi system components..
Reply With Quote
