You are a brave man Alan
Respect
Hope it works a treat
Pishanto Specialist & Super-Daftee
Location: Dagenham Essex
Posts: 11,184
I'm Allen.
You are a brave man Alan
Respect
Hope it works a treat
[
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Thanks Allen, I'm really quite excited to hear it, from what SQ has written about them they are a quality phono stage
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Senior Member
Location: Prescott, AZ USA
Posts: 120
I'm Chris.
Very lovely setup you have there. You make me feel like getting an r2r but my wife would kill me. Hahhah
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
costerdock
LOL
No kidding a good calibrated R2R is class and blows everything else away
I would love a studer 812
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,785
I'm Andrew.
We could compare reviews? Would be interesting to see what you have to say about yours.Originally Posted by 337alant
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Senior Member
Location: Hartlepool UK
Posts: 1,638
I'm Alan.
Yes good idea, looks like yours is getting the royal treatment from Simon who has probably built more of these than anyone else id imagine.
Mine is pretty standard but I am still expecting it to be a big step up from what I have now and I think my Kontrapunkt B still has more to offer with the right loadings.
BTW didn't you have a Cadenza? Black what did you think of that ?.
Alan
Turntable - Garrard 401/Jelco 750L/Ortofon Kontrapunkt B, Pioneer PLC 590, Micro Sieki MA505 , Denon DL103R - DIY Paradise Phono stage - Reel 2 Reel Studer A810, Otari MX55,Tascam BR20, Revox A77, B77, PR99, TEAC X1000 & 3440, Digital HTPC / Young Dac - Preamp - DIY B4, 821, Power Amp's DIY Avondale NCC300 Mono Block, Speakers Wilmslow Kit Volt BM220.8 / Scanspeak D2905/9500
Trade: Mark Grant Cables
Location: East Yorkshire, UK
Posts: 1,223
I'm Mark.
Great thread and pictures
The Batteries where a bargain for £3.. by 337alant, on Flickr
Well although I was happy with the end result I had a Hum, I tried every combination of earthing arrangements and the mains lead is shielded but nothing changed it as the problem is just the proximity of the transformer, If I turn the module on its side or put some metal shielding in between it reduce quite a bit but was not silent
So spurred on by Ken Quinn’s wonderful DIY Battery powered Phono stage
So I ripped out the power supply from the box and wired in the batterys
. by 337alant, on Flickr
The batteries wont fit in the box so I stuck them down the side my rack
. by 337alant, on Flickr
Sound Quality
As soon as the needle hit the record of Joe Cockers Sheffield steel album I new this was special the phono stage was now silent and the sound stage and dynamics had opened right up.
So I am well chuffed and will get a couple of smaller gell batteries to fit in the case at a later stage.
I measured the current output from each battery at 6ma so these 4.7AH should last about 6 months
Happy days
Alan
It would be a good idea to fit a fuse on both of those batteries, all it needs is a pair of inline fuse holders and a few crimp terminals.
https://www.google.co.uk/search?q=in...w=1593&bih=981
They are near wood that burns well and no fuse could be a problem if there was a fault.
-
The Supernatural Anaesthetist
Location: North East
Posts: 3,915
I'm Steve.
Alan is The Man!!!!!!
Trade: Wakefield Turntables
Location: Yorkshire
Posts: 9,785
I'm Andrew.
It will be a big step up, have you read the review I posted? It makes for interesting reading. This new 4box version has a few more tweeks compared to Simons version. I do indeed have a Cadenza black, it's excellent the best cart I have ever owned and was used in the review I did of the paradise phonostage.
SS
CD Teac VRDS25X(Audiotuned) DECK 1210 Mat Crystal Audio Mods MN Base/Bearing/Platter+Ebony armboard Feet Isonoe PSU Paul Hynes SR7EHD-27XL/DCSXL Ag DC lead/3 Stage Regs/Recap PCB+No Pitch/Strobe/Light ARM SME V(Kondo Ag Rewire&Tags) MC Cadenza Black FGS CABLES Arm Yannis SPD-4 IC Yannis 222 Litz+Ag bullets Power WAR PRE ATC SCA2 SPEAKERS ATC 50ASL STANDS Atacama PHONO Sugden Masterclass PA4 SUT Ortofon ST80SE POWER PSAudio P10
VALVE / MONO
PRE Croft Epoch(Modded) AMP Sondex S100 (Modded) SPEAKERS Tannoy 15"MG+RFC Warwick cabs+ Ref XO + Batpure supertweeters DECK Garrard 301 Mat Teunto Bearings 401(Bastin) Plinth Bamboo Arms 3009/3012 PSU Eagle+Tachometer MC Ag Meister II/FGS + Ortofon SPU MONO CABLES Arm Yannis 420.5 Litz+ SpeakerPC Tripple C+WBT-0681 Ag IC Oyaide FTVS-510 AgWBT 0110Ag Phonostages Paradise(4 Box Mega-Modded) / Croft Musicmaker
Double Daftee
Location: Essex, UK
Posts: 3,439
I'm Andy.
Just bought a piece of 20mm Perspex from E-bay
It arrived with rough cut edges so I sanded them down then put a 5mm bevel on the top edge with my plane followed by fine sand paper on all edges.
. by 337alant, on Flickr
It looks and sounds better than the old plywood shelf as well, the deck sounds cleaner and tighter
Alan
Nice Alan, thinking of a DIY Perspex shelf for my forthcoming Gyrodec project as the Michell versions are not cheap.....
System; Michell Gyrodec SE/ Orbe Clamp/ Gert Pedersen armboard mod/ HR PSU/ SME V / J7 Tonearm cable/Ortofon Cadenza Black// Jez Arkless Turbo nutter B------ /Trichord Dino+
Amplification and loudspeaker set up is at the moment being split into two groups, comprising the following;
1. Same sources as above; SONY TAF-770ES/SONY CDP761E/Cable Talk 3.1 loudspeakercable/ Harbeth Compact7ES2/ Stands
2. Virtue Audio Sensation M451battery PSU, ClarityCaps upgrade/ Sensation M901/Russian PIO caps with Teflon bypass caps upgrade/ JT Dynamic PSU with various tweaks/ Connex Audio 5N Litz loudspeaker cable, Impulse H6 Loudspeakers.
Me so horny- Impulse H6 Horny
Posting Permissions
Reply With Quote
