Cheers!![]()
Cheers!![]()
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Some things can't be rushed. I packed away a fortune worth of audio equipment the moment my wife said she was pregnant. It took me two decades and the need to do a loft conversion before I finally dug out the bits again. Most people had thought I had got rid if the stuff or had just lied about me ever owning any of it. So Marco might be on the same type of trip.
Out of interest, things that I packed away:
2 x Micro Seiki MA-505 MKI
2 x Technics EPA-501H
1 x Micro Seiki DDX-1000
1 x Ariston RD-40
1 x Sony PS6750
1 x Mitsubishi DA-10
Plus a few dust arms. Since then eBay has enlightened me to the curet day value of all that stuff. Glad I didn't flog them then.
Mike,
Yep, it's half done. I've just got the 'interesting' bits to add
I've got too many things on right now to finish it, but don't worry it'll be posted before your next birthday
I'm also trying to get the Yaqin sorted.
Has your deck 'emerged' yet from its slumber?
Marco.
PS. Sensi, did you read my reply about the EPA-501H?
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Posts: 544
Got a box?
Got a tranny with 18-0-18 upward and a couple of caps, 4700mfd will do, and a bridge?
If so then you can buy http://cgi.ebay.co.uk/ws/eBayISAPI.d...e=STRK:MESE:IT
It is then upgradable to fourseperate power supplies, as is your want.
Sensi,
Nice one. Keep me in the loop
Mike,
Looks like Richard has sorted out the phono stage side of things. For the cartridge do you fancy a coil or an MM jobby, and what type of sound do you like?
I can then recommend some suitable cartridges within your budget
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
Interesting!
But could I ask a couple of questions please?
1. Ignoring PSU's for the moment, Is there any difference in circuitry between that board in the link above and the Phono1 and Phono2? (I'd already been looking and they figure in my short list).
2. Would it be possible purchase the board and four PSU's together, and at what price?
3. If I purchased four PSU's I assume it would be preferable to use four separate transformers, bridges etc. Yes?
Cheers,
Mike.
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.
Well, it depends on which phono stage I settle on, but considering present budget constraints I expect to be looking in the MM playground for now.
Sound wise - clean, detailed (but not too 'in yer face'), tight bass - my speakers can be a bit 'full' sounding thanks to twin quarter wave pipes, so nothing to exacerbate that tendency.
Cheers,
Mike.
Shian7
--------------------------------------------------------
Kudakutemo
kudakutemo
ari mizu-no tsuki
Though it be be broken -
broken again - still it's there:
the moon on the water.
- Choshu.