__________________________________
"Subtle is the Lord, but malicious He is not"
- Albert Einstein.
__________________________________
A repair job I once did was on an amp which went into DC protection after about an hours use.
Cut a long story short I traced it down to a pair of single op-amps used in the servo, they was supposed to be opa604, the printing didn't even look right on close inspection so was possible fakes (god knows why anybody would want to make fakes of these) they also measured extremely noisy .
Anyway replacing with a new pair of proper ones cured the problem
BTW, theres the opa827 now which is supposed to be an improved version of the 627, theres also a bipolar input version opa211
Location: Leeds, England.
Posts: 24
Mark, hailing from Leeds, in the cold and bleak North of England.
Location: Solihull
Posts: 80
My own WM8716/LM4562NA modded version is just something else. I have been testing mine for a few weeks now against a standard TC-7520, and on complex material the separation is far better.
If I can get my hands on a small quantity of the WM8716 without having to buy the 1K minimum quantity I might do a limited run of a SE version if there is enough interest. But keep in mind that it could cost an extra £30 to £50. The chips would have to be inserted by hand on the PCB since it would require far too much to reprogram the automatic pick-and-place machine to do a limited run.
Stan
Is this the upgrade you are looking into for those of us who already have a 7520?
Jerry
Hifi: IPL transmission line floorstanding speakers, Squeezebox Touch, Denafrips Ares 11 DAC, DCB1 Pre-amplifier, Croft Series 7 power amp.
Custom Hifi cables HA10SE headphone amplifier and Hifiman HE-400 headphones.
AV system: LG 55B7, Denon AVR -x2300w receiver, Quad 12L (front) 11c Centre and 11L rear . Velodyne DD15 subwoofer.
Nope. This is a completely separate product. It's not an upgrade of any sorts and I don't intend to make more than 50 or so and share them between myself and my handful of distributors around the globe. But it is early days yet. Before anything comes off we are looking at a few months of preparations etc.
STan
How are you going to distribute that number fairly?
Me first by the way.
Jerry
Hifi: IPL transmission line floorstanding speakers, Squeezebox Touch, Denafrips Ares 11 DAC, DCB1 Pre-amplifier, Croft Series 7 power amp.
Custom Hifi cables HA10SE headphone amplifier and Hifiman HE-400 headphones.
AV system: LG 55B7, Denon AVR -x2300w receiver, Quad 12L (front) 11c Centre and 11L rear . Velodyne DD15 subwoofer.
Location: Solihull
Posts: 80
Stan
I'll have one from you too.
Ade