Closed Thread
Page 664 of 1039 FirstFirst ... 164564614654662663664665666674714764 ... LastLast
Results 6,631 to 6,640 of 10389

Thread: Bargains on ebay?

  1. #6631
    Join Date: Aug 2010

    Location: Torquay, Devon.

    Posts: 5,683
    I'm Shane.


  2. #6632
    Join Date: Apr 2013

    Location: Left AOS

    Posts: 456
    I'm Gone.

    Default

    Quote Originally Posted by southall-1998 View Post
    Scanspeak D2008. Ideal for, say, a Rega Ela

  3. #6633
    synsei Guest

    Default

    Quote Originally Posted by Marco View Post
    On FM, I had a Realistic, something or other, CB radio, bought from Tandy, fitted with a 'Ham Puncher' mic. That 'rig' was quite highly rated, if I remember... With that, I used a 10ft 'silver rod', with a 80W Zetagi 'burner' (signal booster).

    As we lived on the top of a hill, my signal was so powerful my voice used to come booming through people's TVs, all around me and down into the village below, and could be heard for miles!

    1-4 for a copy, c'mon!!

    Marco.
    I was in a similar situation (on top of a hill). I owned quite a few rigs over the years on both AM & FM, a few were good but most were crap. The best rig I owned for clarity, punch and bleedover rejection was a plain vanilla 40ch Harrier CB bought new from Dixons for £49.99. The damn thing didn't need a power mike, it was as clear as a bell. I could reach out as far as the A14 junction on the M6 and RAF Wittering on the A1 on a straight four watts. When I joined the local monitors group I upped that to 80 watts courtesy of Bremi. F*ck me, it has been donkeys years since I used CB speak, I wonder what the scene is like today?

  4. #6634
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,618
    I'm Geoff.

    Default

    Nice little TT. Goldring Lenco GL75 fitted with a Decca International arm! In Hampshire. Ends tomorrow.

    http://www.ebay.co.uk/itm/Lenco-GL75...item27d2c81bd4
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  5. #6635
    Join Date: Jan 2008

    Location: Wrexham, North Wales, UK

    Posts: 110,513
    I'm AudioAl'sArbiterForPISHANTO.

    Default

    F*ck me, it has been donkeys years since I used CB speak, I wonder what the scene is like today?
    Jeez, who knows! It was one of these boys I had, btw, which was made by Realistic:





    With one of these power mics (they were mental):





    I also stuck an echo chamber on it, just for a giggle!


    And a 10ft version of one of these aerials (on a massive pole):





    The reception I got was so good that I could 'DX' to guys abroad, in the likes of France and Italy (this was from Glasgow), when the 'skip' conditions were right! It was called 'skiptalking'. Did you ever do that?

    Marco.
    Main System

    Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.

    Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.

    Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.

    CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.

    Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.

    Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.

    Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.

    Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.

    Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.

  6. #6636
    Join Date: Apr 2012

    Location: N E Kent

    Posts: 51,618
    I'm Geoff.

    Default

    This is "HIGH END". It must be 'cos he says so. High End of something very flat if you ask me. Usual eBay b****cks.

    http://www.ebay.co.uk/itm/HIGH-END-A...item58a03d827c
    It is impossible for anything digital to sound analogue, because it isn't analogue!

  7. #6637
    Join Date: Aug 2010

    Location: Torquay, Devon.

    Posts: 5,683
    I'm Shane.

    Default

    Quote Originally Posted by walpurgis View Post
    This is "HIGH END". It must be 'cos he says so. High End of something very flat if you ask me. Usual eBay b****cks.

    http://www.ebay.co.uk/itm/HIGH-END-A...item58a03d827c
    That thing could be a true pure class a LP12 beater

    Perhaps it sounds equal to the LP12 SE!!

  8. #6638
    Join Date: Dec 2008

    Location: Yorks

    Posts: 16,643
    I'm Nobody.

    Default

    Quote Originally Posted by walpurgis View Post
    Nice little TT. Goldring Lenco GL75 fitted with a Decca International arm! In Hampshire. Ends tomorrow.
    No thanks i'll take the GPO '706F' telephone though i could do with another one

  9. #6639
    synsei Guest

    Default

    This was my fave CB radio Marco. As I said, very plain Jane to look at but the money was spent on the innards. It was a terrific performer


  10. #6640
    Join Date: Dec 2008

    Location: Yorks

    Posts: 16,643
    I'm Nobody.

    Default

    Trio transceivers were brilliant, suprb quality

Closed Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •