Location: gone
Posts: 11,510
I'm gone.
Yes, I agree with this Jerry. Looking at my system I have chosen each component individually and I don't display any brand loyalty except for acknowledging the particular strengths of a brand, for instance Nelson Pass is god when it comes to preamps which explains why I'm on my third.
Yes, I have a diy B1 buffer pre which is very good.
I would agree when it comes to full systems from the one manufacturer (Naim and Linn come to mind here in particular), but there are instances where combining the use of certain products from one manufacturer can produce significant sonic dividends, especially in the analogue/vinyl domain.
I've certainly achieved that with the use of Ortofon products, namely my RS-212-D tonearm, SPU and ST-80SE SUT, where the sonic synergy gained is obvious and immediately recognised (and appreciated) by everyone who has heard it
Marco.
Main System
Turntable: Heavily-modified Technics SL-1210MK5G [Mike New bearing/ETP platter/Paul Hynes SR7 PSU & regulator mods]. Funk Firm APM Achromat with Nagaoka GL-601 Crystal Record Weight. Isonoe feet & boots. Ortofon RS-212D tonearm with Denon DL-103GL, in a Denon PCL-300 headshell, fitted with Funk Firm Houdini and Kondo SL-115 pure-silver cartridge leads.
Paul Hynes MC head amp/SR5 PSU. Also modded Lentek head amp and Denon AU-310 SUT.
Other Cartridges: Nippon Columbia (NOS 1987) Denon DL-103. USA-made Shure SC35C with NOS stylus. Goldring G820 with NOS stylus. Shure M55E with NOS stylus.
CD Player: Audiocom-modified Sony X-777ES/DAS-R1 DAC.
Tape Deck: Tandberg TCD 310, fully restored and recalibrated as new by RDE, plus upgraded with heads from the TCD-420a. Also with matching TM4 Norway microphones.
Preamps: Heavily-modified Croft Charisma-X. Power Amps: Tube Distinctions Copper Amp, fitted with Tungsol KT-150s. Quad 306.
Cables & Sundries: Mark Grant HDX1 interconnects and digital coaxial cable, plus Mark Grant 6mm UP-LCOFC Van Damme speaker cable. MCRU 'Ultimate' mains leads. Lehmann clone headphone amp with vintage Koss PRO-4AAA headphones.
Tube Distinctions digital noise filter. VPI HW16.5 record cleaning machine.
Speakers: Tannoy 15MGs in Lockwood cabinets with modified crossovers. 1967 Celestion Ditton 15.
I tend to agree as well even though I am probably the poster boy for one make systems. But if you find the "quirks" or sonic signature of one company quite appealing, it does make some sense to first look through their line for additional gear. In my case it worked well, but only as far as the other individual components I was able to compare them to were concerned.
I both agree with Jerry () and also with Marco. I know Jerry probably doesn't agree with me here, but my experience of late 90s Krell showed me that even they couldn't decide on a "family sound" for their products as the cheaper models were poles apart (not necessarily worse) than the bigger and more desirable models. Naim too went from valvey-musical but slightly sloppy (bolt-up 250 and 120), to harsh and "dynamic" with the CB models, to beefy, punchy and ever-so-slightly-grainy with the current crop on the whole in my expoerience with the current models, which is a sort-of evolution I suppose? Linn went from bland, to hideous to lean-n-sharp with their mid period amps, although I don't know about the current crop, which doesn't seem to feature on anyone's radar for some reason (over-pricing?).
The thing is, with so much used stuff around at almost sensible prices now, it can be fun to play around with combinations and move on should you not like what you've done.
I can't go on and I can't go back, I don't feel so matter of fact,
I tried and tried to make good sense, What's the good to try it all again?
Location: gone
Posts: 11,510
I'm gone.
Yes, the KRC-3 pre I used to have had a different sonic flavour to the KAV-250a power amp I am now besotted with.
The KRC-3 was slightly warm and dark, the 250a is very open and a bit brightly lit (but I love it with a passion!). I prefer things brighter rather than darker, it's just a personal preference.
Justin / user211 has heard my MBL-based system several times driven by a variety of valve and solid state amps, he'll be visiting Jerry Towers this Friday, I'm sure he'll be happy to post his impressions here of its Krell 250a-amped performance.![]()
Last edited by jandl100; 01-05-2013 at 18:24.
.
I'll be interested in his (and your) comparison between the Parasound and Krell. I'm wondering if the Krell is a little more towards the gruntiness of my Chord, or is it different again?
Location: gone
Posts: 11,510
I'm gone.
I'll wait for Justin to have a listen before giving my views on the Parasound / Krell comparison.... not that he'd take a blind bit of notice what I thought, he's a chap not easily influenced by others!
![]()
.