Ali,
I need to tell you about the charging of the two DACs that you will be receiving.
The JKDAC (Sabre DAC chip) is the one with a toggle switch. It requires an external PS of >6V for powering the battery charger board in the device. It charges when turned off (toggle switched up). This is an older model.
The JKDAC32 (PCM5102 DAC chip) has two push buttons with red & green leds. This is the later model & charges from a 5V supply. This allows a spare USB port to be used for powering the battery charger board. A special USb cable is supplied to allow this. An external 5V PS could also be used. This device is designed to be always on charge, even when playing music. So the red button is always pushed in & a 5V supply attached. I believe you might need to charge this JKDAC32 before use?
A user guide for the current versions of both Dacs:
JKDAC https://docs.google.com/document/d/1...sJeNzD39U/edit
JKDAC32 https://docs.google.com/document/d/1...y-0EqpXBY/edit


Reply With Quote
Originally Posted by Ali Tait


